Search results

  1. cb250nproject

    1982 CB750F... The resto-not

    Just caught myself up on this build, Jimbo this is shaping up to look bad ass, those rims came up a treat.
  2. cb250nproject

    FRANKENHONDA II the 1982 DOHC CB 750F2 Build

    offending gasket out. and Steve down at Old Gold Motorcycles managed to find me a set of second hand oil lines So we’re just about in business for this oil cooler upgrade. Sent from my iPhone using DO THE TON
  3. cb250nproject

    FRANKENHONDA II the 1982 DOHC CB 750F2 Build

    That is something I won’t be finding out Sent from my iPhone using DO THE TON
  4. cb250nproject

    FRANKENHONDA II the 1982 DOHC CB 750F2 Build

    Well OMM was hard at it and more successful than myself thankfully He nailed the sump modification, hopefully the hoses that I ordered will arrive soon, then I just need to wait for Rex to make me up a new oil pump and we will just about be away... well as long as I can finally manage to...
  5. cb250nproject

    FRANKENHONDA II the 1982 DOHC CB 750F2 Build

    100%, Teazer I owe you a beer, hit my up if your ever in Melbourne, Australia [emoji106] Sent from my iPhone using DO THE TON
  6. cb250nproject

    FRANKENHONDA II the 1982 DOHC CB 750F2 Build

    I’ve just reviewed my pictures, the gasket is way off, F$@k [emoji17][emoji379] looks like I’m going to have to strip her down again and do it all over... that’s pretty frustrating I did explain that it was bored out to 823 cc and that I needed the same gasket as last time... he said this one...
  7. cb250nproject

    FRANKENHONDA II the 1982 DOHC CB 750F2 Build

    The guy who I got my last gasket from said this would be ok, [emoji848] I’ll be pretty pissed off if he has stitched me. Sent from my iPhone using DO THE TON
  8. cb250nproject

    FRANKENHONDA II the 1982 DOHC CB 750F2 Build

    Ok, so got some shed time, and it’s not been without Murphy’s law rear it’s head a few times. I cleaned up the cylinder surface As per Rex’s instructions I used a small amount of three bond 1211 on the head gasket ( the pink string is attached to a magnet that I use to retrieve the cam...
  9. cb250nproject

    FRANKENHONDA II the 1982 DOHC CB 750F2 Build

    Yep I actually hit both dowels with the file just to be sure ;) OMM asked the same thing Sent from my iPhone using DO THE TON
  10. cb250nproject

    FRANKENHONDA II the 1982 DOHC CB 750F2 Build

    Thanks Pete, I picked up the head gasket yesterday, so hopefully after a bit of running around today I’ll get some time to piece her back together. Sent from my iPhone using DO THE TON
  11. cb250nproject

    FRANKENHONDA II the 1982 DOHC CB 750F2 Build

    Fingers crossed, I’m just waiting on the spares shop to confirm they have the head gasket so I can start to slowly and methodically put her all back together again so it’s all good. Sent from my iPhone using DO THE TON
  12. cb250nproject

    CB750 1981 - My Latest Project

    This is shaping up to be a good build I like the rearset brackets, I’m just about to embark on the same mission. Sent from my iPhone using DO THE TON
  13. cb250nproject

    FRANKENHONDA II the 1982 DOHC CB 750F2 Build

    So I picked up the head today from Rex, he fixed up the damaged holes and gave me Honda bolts which went a little deeper than the ones I had In addition he linished the grooves of the cam tensioner and mad a spacer to adjust the height We spoke about using a little sealant on the head...
  14. cb250nproject

    FRANKENHONDA II the 1982 DOHC CB 750F2 Build

    So it’s been a while and while the head is at T. rex racing getting halo coils put in I’ve turned my attention to the rear set adapters as Rex said the rear sets sat too high. I’ve just made up a template that I will take to OMM so we can look at knocking over the last few items from Rexs’...
  15. cb250nproject

    CB1100F

    Sick build Sent from my iPhone using DO THE TON
  16. cb250nproject

    Here's my modded XS750 - Soon to be 850

    I like it I’m in Sent from my iPhone using DO THE TON
  17. cb250nproject

    Take 2: CB750K2 Steampunk(ish) Bobber Thing

    Absolutely amazing build, attention to detail is second to none, it's finished beautifully. I think this is one of my all-time favorite builds period.
  18. cb250nproject

    Any other Aussies still around?

    here in Melbourne
  19. cb250nproject

    FRANKENHONDA II the 1982 DOHC CB 750F2 Build

    Well I halicoiled one hole successfully, but I’ve identified another 3 that I need to fix. I’ve had to call stumps because I’m of yours work in Tassy for a week so I’ll luck up where I left next Saturday, if all goes well (famous last words) may even get a leak free test ride in Sent from my...
Top Bottom