Search results

  1. O

    2019 CVMG Paris - swap and show

    I will be camped out on the far right over by the Kawi Triple guys, to the right of the race track. I have some NOS Vesrah and Athena VALVE SEALS in original packaging 10 seals per bag - asking $10/bag. Here is what they fit : replaces HONDA #12209-413-003 Q'ty Maker Model...
  2. O

    2019 CVMG Paris - swap and show

    I have been going since 2010 and only missed a few because of my wedding anniversary. I ride there with a buddy of mine, he is into Honda's and I am into Kawasaki's - But I still talk to him :) Lots to see in the grounds and even in the parking lot, especially if the weather is good.
  3. O

    2019 CVMG Paris - swap and show

    June 14-16 https://www.cvmg.ca/ParisRally
  4. O

    2019 CVMG Paris - swap and show

    Was wondering who is going? I had to miss last year but am registered for this year. Been working on a new bike to ride there with more luggage and carry capacity to do the camping thing.
  5. O

    Paris Swap Meet and Show

    Who's going? I will be there from early Friday till early Sunday... Doing the Camping thing again.
  6. O

    Paris Ontario April 29.

    I will be there, was working on a bike to ride but it still needs some work so pulled out the bike I rode there last year. Hoping the rain holds off for the ride back.
  7. O

    79 Kawasaki KZ650 - 8 minute video, 282 West, Pennsylvania

    Re: 79 Kawasaki KZ650 - Engine Assembly I recommend filling the oil pump up with fresh oil prior to installing the oil pan, that way it won't suck air upon first start. Looks like a pretty clean build, you should be proud of that... too many guys rush this sort of thing. You also may want to...
  8. O

    79 Kawasaki KZ650 - 8 minute video, 282 West, Pennsylvania

    Re: 79 Kawasaki KZ650 - Engine Assembly Not to bust your balls but if you look at a completely stock motor that has never been split they don't trim the excess off... Every KZ motor I have ever seen has it squished out uneven, and if you apply thin then it will not look out of place. I have...
  9. O

    London Riders?

    I am from London, not been on here for a while but have a vintage bike and do some riding around the North end of town. I ride a '77 KZ650 I am getting ready for the Paris Swap meet and possibly that Grand Bend event.
  10. O

    Custom Parts and Machining

    Specializing in custom one off fabrication... swingarms,airboxes,rear sets,oil coolers Anything you need I can make Any make or model Cycle Canada Showcase feature bike Located in Hamilton, Ont., Canada Call 905-689-1790 ask for Bill
  11. O

    Stock KZ900 Pistons/Rings

    Stock KZ900 Pistons w rings Low KM in great shape... original pistons with newer OEM rings $50 - local pickup only (unless you want to pay shipping) Located in Hamilton, Ontario, Canada. Call 905-689-1790 ask for Bill
  12. O

    Sun Rim - WM4.5 X 18" $60

    Older used Sun aluminum rim ('85?) - has some tool marks from tire irons on the edges Satin finish with 40 hole pattern WM4.5 size - 18" dia x 2.75" wide... will fit a 110-120 tire Will build up true - came off the front of a KZ900 Superbike $60 - local pickup only (unless you want to pay...
  13. O

    Corbin Gunfighter Seat

    seat is now SOLD - Thanks for looking
  14. O

    Corbin Gunfighter Seat

    This model fits Kawasaki 900-1000 from 1973-1980... it might also fit some other bikes with some mounting alterations, it has a fiberglass seat pan. This seat is a few years old but has seen very little use and its always covered up out of the sunlight... I want to sell it because I had a...
  15. O

    Seat recovering guy in St. Catharines?

    Thanks Joe. Cheers!
  16. O

    Seat recovering guy in St. Catharines?

    Hey, I was at the Paris Swap meet in June and saw a really nice Yamaha SR500 single done up to the nines... it had a really nice seat on it and I asked the owner who did it, he said the guys name and that he was from St. Catharines. I guess I might have had a few beers under my belt but for the...
  17. O

    Sun rim - WM4 18" x 2.75" 40 hole

    Older used Sun aluminum rim ('85?) - has some tool marks from tire irons on the edges Satin finish with 40 hole pattern WM4 size - 18" dia x 2.75" wide... will fit a 110-120 tire $60 - local pickup only (unless you want to pay shipping) Located in Hamilton, Ontario, Canada. email if...
  18. O

    Alloy Rear 18" 36 hole rim - Toronto area preferred

    Turns out it is a 19" x 40 hole so I was completely off the mark... Milton swap meet is soon, so maybe some luck there?
  19. O

    Alloy Rear 18" 36 hole rim - Toronto area preferred

    My buddy is replacing his front Sun rim for an Excel to match a new rear rim... it a SUN WM6, not sure if it is 36 or 40 hole, pretty sure it is 18 in. It on the bike right now - KZ900, riding it in this fine weather. He is located in Hamilton... not sure on what the timeline is for the swapover...
Top Bottom