Search results

  1. NoRiders

    Honda NSR125 JC22 disc options

    So, after a good few hours browsing various Honda model discs I think I might've found a workable alternative disc that meets the requirement. The requirement being I need a disc with a 5mm (approx) offset to allow the use of a bigger caliper and have wheel clearance. So, looking for an...
  2. NoRiders

    To paint or not to paint? Decals will do.

    For my latest project I had in mind a Suzuki GSX-R mid/dark blue & white colour scheme. I had thought to mask up stripes/patterns and spray them in. Then, I thought about decals, made up in the shape I had in mind and colours, applied to a white painted tank and panels. Found a guy on...
  3. NoRiders

    Paioli forks - Honda NSR disc - caliper needed to suit.

    Hi, Looking for help on finding a suitable caliper to mate my Paioli forks with the Honda NSR JC22 wheel/disc set up I hope to run. As you can see the mounting holes on the forks are a long way away from the disc and I don't have enough experience in front brake calipers to know if a certain...
  4. NoRiders

    Distinguished Gentlemen's Ride - Oxford 2017

    Oxford DGR was a blast, highest turnout outside of London we're told. Well organised, marshalls directing the convoy and all set out well. Generous primary meeting area, staging/catch up points and a midway break were all good. Final destination was a pub with a mahoosive car park and extra...
  5. NoRiders

    Brackley Festival of Motorcycling - Sunday 13th - TOMORROW!!

    For those still active on here, there's a cracking good event in deepest darkest Buckinghamshire...details in the link. http://www.brackleyfestivalofmotorcycling.co.uk/ On a side note, I thought this was last Sunday, to trundled up there on the CBX only to find it wasn't on that day!! DOH...
  6. NoRiders

    Logo on forks with no name - ideas please.

    Using these forks on a project but have no idea what make/model they came off, 36mm single disc leading axle, simple twin bar clamp on top yoke. This logo is on the lower fork leg. Front view Any help greatly appreciated, thank you.
  7. NoRiders

    Honda NSR wheel bearing - custom sizes needed.

    Wotcha, hope someone can ease my concerns. I'm fitting NSR125 1999-2002 wheels to my project but to do that I need the bearing to measure 20mm i/d to suit the gs1100 axle spindle I will use on the gs1100 swingarm. Standard bearings just removed. My concern is for the small bearing, I'll...
  8. NoRiders

    Honda NSR125 wheel bearing - custom sizes

    Hi all, hope someone can ease my concerns. I'm fitting NSR125 1999-2002 wheels to my project but to do that I need the bearing to measure 20mm i/d to suit the gs1100 axle spindle I will use on the gs1100 swingarm. Standard bearings just removed. My concern is for the small bearing, I'll...
  9. NoRiders

    Latest project - Suzonda WTF200/2 in progress

    Hi (if anyone is actually reading the UK posts? :/ ) Thought I'd post a quick review of my latest project. I'm working with what I have and trying to budget hard as I can't really justify another bike, but couldn't resist throwing parts I have or obtain uber cheaply together. I fancy a...
  10. NoRiders

    Help - identify forks and swingarm please

    Hi all, I'm asking for help to identify these forks and swingarm I've bought 'on spec' for beer money. The seller didn't know what they came off of and the only clue is the Honda decals on both. The swingarm looks to be a monoshock version The forks look lightweight and not very wide apart...
  11. NoRiders

    2x stroke street tracker - project coming together slowly.

    Hi guys n gals, Just putting this out there. I have in mind a new, long term, project. I fancy a 2smoker ding ding engined lightweight tracker stylee street bike with motoxer looks but super moto handling...bit gangly lookin' and fun to ride. As is usual, this will be an minimalist budget...
  12. NoRiders

    DTT BOTM Best of the Best - Unofficial Bike of the Year 2017 - voting now.

    Hello chaps, Sonrier has instigated voting for the best of the best DTT BOTM winners, get your vote in as it's close. Thread link: http://www.dotheton.com/forum/index.php?topic=72628.0;topicseen
  13. NoRiders

    BMW K1100RS 1994 - to buy or not to buy?

    I'll put this out to the DTT collective, thank you for replies. I've just spotted a 1994 BMW K1100RS sitting in a front garden looking neglected. Knocked and spoke to the owner's wife who gave me a little bit of background on the bike as well as her thoughts about whether her husband will sell...
  14. NoRiders

    Kempton Park Motorcycle Jumble - December 2nd 2016

    If you're free this coming Saturday, I can recommend a trip to Surrey, Kempton Park Motorcycle Jumble and this time an Off Road Motorcycle show as well :) Details here: https://www.facebook.com/events/1205363239537755/
  15. NoRiders

    CBX550 - race/sports style levers

    Here's a question for the DTT collective: I like the look of the adjustable, alloy billet race levers for both brake and clutch, the two finger jobbies. However, I can't find anyone offering them for the CBX550...does anyone know of another Honda model that uses the same levers so I can cross...
  16. NoRiders

    CBX550 - Bleeding front brakes from dry

    Hi, Hoping someone on here might be able to help me please. I thought I'd try and bleed the front brakeson my CBX550 project today, filled the reservoir, opened one caliper bleed nipple and pumped the lever...nothing. Not much fluid movement save for a small/slight blow back from the transfer...
  17. NoRiders

    STAG Wellseal - gasket sealant

    Amongst other goodies picked up this weekend, I have now used the STAG Wellseal and can confirm it's very good (£12). Sticky dark honey in texture, paint it on carefully, it's runny but finds it's own level to an extent. Used in on the rocker cover rubber gasket and side cover paper gaskets...
  18. NoRiders

    A blast down memory lane....proper 'Cafe' racers doing it.

    This cool film popped up on my FB feed from Kempton Park Motorcycle Jumble: https://www.facebook.com/MadeInMetalMotorcycles/videos/827527507376224/
  19. NoRiders

    A blast down memory lane.....

    This cool film popped up on my FB feed from Kempton Park Motorcycle Jumble: https://www.facebook.com/MadeInMetalMotorcycles/videos/827527507376224/
  20. NoRiders

    CBX550 - custom seat - back from upholsterer.

    Am I over-engineering the seat? I have it in my mind to have the seat hinged for access and locked down for security (of sorts). So, I ordered a s/s offset hinge to screw to the subframe and underside as well as a hatch lock to hold it down/in place. I have two rubber locating bungs which...
Top Bottom