Search results

  1. der_nanno

    Mikuni 33mm flatslide carbs for Yamaha XS750 / 850 for sale

    As the title implies: I have a set of 33mm flatslides for Yamaha triples for sale. The carbs are jetted for K&Ns (not included as I need them for my new, smaller flatslides - torque is more important on a sidecar than outright top-end power), have been synchronized and come with two sets of...
  2. der_nanno

    Running Ignitech under Linux (and potentially Mac)

    Those who know me on private or professional basis, do know that I am not a huge fan of Microsoft Windows. I like my software just how I like my women... err... Anyway, I am an OpenSource guy, whereever and whenever I can. Unfortunately the Ignitech software so far has only been available under...
  3. der_nanno

    DT250 in RD250 frame and DT2-racing guide

    Guys, due to a stroke of luck, I might end up being the proud owner of a DT250 engine. Which brings me to two questions: 1) Has anybody ever fitted a DT250 into a RD250 (aircooled) frame? Not sure if the DT250 isn't too tall to go in there. 2) There used to be a DT2-racing guide - anybody...
  4. der_nanno

    Nanno's "mule" a TR1 for everyday

    Some may or may not know this bike, but it has been part of my life for more than just a few years. What you're looking at is a 1981 Yamaha XV1000 TR1, with approx. 113,000km, heavily modified 1063 engine, VM38 roundslide carbs, homemade stainless exhaust and quite a few suspension mods as...
  5. der_nanno

    For Sale: Two-turbo kits for Yamaha XV

    As I will be rebuilding my Turbo TR1 to a Supercharged TR1 this Summer, I have two Turbo-Kits that I want to part with: 1) my tried and tested draw-through setup, which consists of: * Turbo-headers with T3 flange * 2in1 inlet manifold * T3-turbo (needs new center section or only new bearings if...
  6. der_nanno

    For sale: VM36 roundslides for Yamaha XS 750 XS850 Triple

    Alright folks, this is one for the connoiseurs of fine carb-art. I have happened to fall over a triple set of RS33s for my XS Triple Sidecar, so my set of Mikuni VM36 roundslides is surplus to requirements. They have been ultra-sonically cleaned, jetted and come with all the cables and...
  7. der_nanno

    Nannos XS Triple Sidecar

    By the 9th of September this project will actually have gone a full year. The original plan looked somewhat differently, i.e. build an XS750 rig with a Dnepr sidecar and then sell my old and trusty (everyday) SR500 sidecar. Now almost a year on it looks a lot more promising that I'll be done in...
  8. der_nanno

    Yamaha XV 700/750/920/1000 Turbo Kit for sale

    Alright guys, as I am going down a different route (either a different turbo or maybe even a supercharger setup), I need to procure some funds. As such I am selling my initial turbo setup, it's the one that can be seen in this Youtube video: https://www.youtube.com/watch?v=tIHnSvJ87vc The...
  9. der_nanno

    Nannos Hotrod Turbo TR1.1 (XV1000)

    I've promised, I open a thread on my turbo and it's probably one of the last things I'll do in 2016, but hey... rather late than never, right? Well to be honest, the whole story started about two years ago, when I "bought" the bike for a crate of beer. Mainly because the engine was seized (the...
  10. der_nanno

    der Nanno from Austria

    Hi there everybody, my name's Greg and I guess one or the other might know me from the odd other forum. I have a soft spot for old aircooled Japanese Junk and have had my fine share of tuned Suzuki GSes and (in the last few years) Kawasaki Zeds. Nowadays I mostly fool around with spiced up...
Top Bottom