Search results

  1. cxman

    Post a pic of your latest purchase

    clean the carbs on the 500 and ride it that thing runs great just a little loud with no baffle in the 4-1 or just slap my mikuni setup on
  2. cxman

    WTB CB750 SOHC complete cylinder head

    ok i got one thanks
  3. cxman

    WTB CB750 SOHC complete cylinder head

    75 76 or 77 with good cam and rockers complete
  4. cxman

    Honda 650 single

    be careful how you prime the oil system when you start the motor they can air lock and it has no oil pressure light as it really does not have oil pressure per se strats out at maybe 15 psi then dwindles as the motor gets warm it uses high volume flow to lubricate everything as it has all...
  5. cxman

    CB750 DOHC and Keihin CR31 settings

    when one does that for me the first thing i would do is put a new set of plugs they can carbon track real quick also verify your compression to rule out basic mechanical issues
  6. cxman

    1977 BMW R100/7 Sarcoplasmic Cow Hellride

    you need a magneto and maybe a little richer the pipes are getting bluish?
  7. cxman

    Toronto Cafe Racer Bobber groups ?

    MMMMMM timmys
  8. cxman

    Valve guides and vapour blast cleaning...

    lap or grind?
  9. cxman

    CB750 DOHC and Keihin CR31 settings

    get a heat gun and verify that all cylinders are firing dohc can be a electrical nightmare so make sure both 1-4 and 2-3 are firing as if its running on one set weakly it will look like the carbs are rich i go through this with clients with dohc almost daily 98 percent of dohc carb issues are...
  10. cxman

    WANTED: Cam chain tensioner push bar - CB35F/CB400F..

    wow that is new
  11. cxman

    WANTED: Cam chain tensioner push bar - CB35F/CB400F..

    david silvers has them
  12. cxman

    AlphaDogChoppers

    we got lucky for a while ! glad your back and doing better
  13. cxman

    1978 CB550 Pieces/Parts Hellride

    so is the 360 build one you are doing with the kids?
  14. cxman

    73 CB350 twin HELP!

    main is probably way to small 150 mains, 6F4's in the richest clip positions, #176 P-6 needle jets, 25 pilots, 0.5 air jets, 2.5 slide cutaways. air/fuel mixture screws are set 2 turns out was what i ran on my cb350 it ran almost perfect just needed i think a better needle but was so close to...
  15. cxman

    1972 SL100 Lifan 200CC 163FML Engine Swap and 12V Upgrade

    i used a vm roundslide the flat slide would not be my choice for that motor
  16. cxman

    74 Suzuki T500 - The Phoenix

    here is some https://hvccycle.net/suzuki-t500-gt500-71-77-complete-gasket-kit/ https://www.partsnmore.com/parts/suzuki/t500/ https://www.cruzinimage.net/2017/12/19/71-77-suzuki-t500-gt500-engine-gasket-set/ https://thekneeslider.com/motorcycle-parts/motorcycle-parts.php?s=Suzuki+Titan
  17. cxman

    XS1100 #2 Carb Main Nozzle

    on the ones i have done they are the same yamaha calls for them to be the same they only list one part number (6) for each carb here on the diagram https://www.partzilla.com/catalog/yamaha/motorcycle/1979/xs1100f/carburetor
  18. cxman

    NGK terminal cap nuts?

    i buy them for my coil on plug kits and the only cheap source is a scooter parts place
  19. cxman

    what do i have to do to become an advertizer ???

    what do i have to do to become an advertizer ???
  20. cxman

    Sourcing Small Dia. Stainless Tube?

    i buy from a place called metric metal or parker steel check with them they have a lot of shim tubing and multiple size tubing https://www.metricmetal.com/?gclid=EAIaIQobChMIwsn77Ovc7gIVSr3ACh0daAa_EAAYASAAEgJH7fD_BwE
Top Bottom