Search results

  1. bikeWillem

    DO THE TON BIKE OF THE MONTH - APRIL 2020 - WINNER!

    Thanks, it actually is RAL 7016 I think it has more depth in it than Nardo Grey.
  2. bikeWillem

    DO THE TON BIKE OF THE MONTH - APRIL 2020 - WINNER!

    I complete missed this, but thanks a lot for the kind words. It's an honour to have the Bike of the month!
  3. bikeWillem

    Dominator Scrambler Supermoto-ish thing

    Nice goodies!
  4. bikeWillem

    Suzuki GSX400 Four Cafe racer with USD fork and monoshock

    Thanks Thom, deze blijft voor altijd is het plan. Als ik m'n eigen huis heb dan moet er een nieuw project komen.
  5. bikeWillem

    Suzuki GSX400 Four Cafe racer with USD fork and monoshock

    I went with the Koso D64 in the end, but I could have gone a bit bigger. Nevertheless I think it's a clean speedo and has everything you need.
  6. bikeWillem

    DO THE TON BIKE OF THE MONTH - DECEMBER 2019 - WINNER!

    Would be a real honor to have my bike in the bike of the month! I have some nicer pics that I will post in my topic!
  7. bikeWillem

    Suzuki GSX400 Four Cafe racer with USD fork and monoshock

    I can tell you, I does sound really nice and the looks that people give you say the same :)
  8. bikeWillem

    Suzuki GSX400 Four Cafe racer with USD fork and monoshock

    It was my first project as well and depending on your resources it can be a good first project bike. But if you don't have a lot of resources I wouldnt buy a gsx400f but rather buy a gsx400e since they are a lot more common and there are more aftermarket parts for It. I spend roughly 7.5k...
  9. bikeWillem

    Suzuki GSX400 Four Cafe racer with USD fork and monoshock

    Thanks! And imagine how It looks when I wipe off the layer of dust that is on everything :-[
  10. bikeWillem

    Suzuki GSX400 Four Cafe racer with USD fork and monoshock

    Thanks a lot! The tank is a custom build aluminium one 8) Bottom part of the forks I put wrinkle Black VHT on and the legs are reanodized in black :)
  11. bikeWillem

    Suzuki GSX400 Four Cafe racer with USD fork and monoshock

    Now still with the original springs as they where within spec. The 'actuator' is a rack and pinion style type I think that is how you could descibe It. There is a lever which the cable attaches to and It rotates a shaft pulling the release pin in. Checked the whole assembly couple of weeks back...
  12. bikeWillem

    Suzuki GSX400 Four Cafe racer with USD fork and monoshock

    Thanks for your tip, but although I have clipons now and a new cable. It is routed without any tight bends.
  13. bikeWillem

    Suzuki GSX400 Four Cafe racer with USD fork and monoshock

    Progress: Did a test drive couple of weeks ago. She's really reactive to the throttle and rides quite nice for as far as I can judge that right now. https://www.youtube.com/watch?v=uubntNooCQQ Some pics of the almost finished bike. (Front fender is also not bolted on in the pic) I still...
  14. bikeWillem

    Suzuki GSX400 Four Cafe racer with USD fork and monoshock

    Small sneak preview Sent from my G8441 using DO THE TON mobile app
  15. bikeWillem

    Suzuki GSX400 Four Cafe racer with USD fork and monoshock

    Thanks guys! I'm really pleased with how it is comming along as well now. Sent from my G8441 using DO THE TON mobile app
  16. bikeWillem

    Suzuki GSX400 Four Cafe racer with USD fork and monoshock

    Now time for some pictures that are even more interesting! Preview of the paintwork: Frame and swingarm are powdercoated: Painted my calipers, front forks and engine block: (Still need to finish the engine by sanding the cooling fins and putting a clear coat on it) Had most of...
  17. bikeWillem

    Suzuki GSX400 Four Cafe racer with USD fork and monoshock

    Damn, this topic is in desperate need of an update! If someone is still interested in it ??? Al lot has been going on but I didn't really feel the need to update this topic. Let's start with the things I corrected. Some of it were already mentioned a while back by you guys and some were my...
  18. bikeWillem

    83 Suzuki GS650 Shafty - Better Late Than Never

    Yeah, the K&N's. Too bad the won't fit my bike. Thanks for the reply anyway!
  19. bikeWillem

    83 Suzuki GS650 Shafty - Better Late Than Never

    Great project! I have a question. I am working on a gsx400f converting it to a caferacer and am looking for the same type of pod filters that you currently have. Could you tell me what the diameter is and center to center distance of your bike?
Top Bottom