Search results

  1. Bama704

    Dirtbag Oil-Boiler

    Turned out awesome. The show looked like a ton of fun from what I was following along with instagram. Nice work, bud.
  2. Bama704

    Help with choosing a pod filter or velocity stack

    Awesome, thank you. I ordered some of those Ram Air filters and they are on the way. It's a really cool bike and tons of fun to ride.
  3. Bama704

    Help with choosing a pod filter or velocity stack

    I picked up a 1982 suzuki katana with a bandit 1200 motor and 1989 gsxr carbs (mikuni BST36ss). It had velocity stacks on it to start with, looks like they were 3D printed but not positive. The bike runs fantastic but after a ride one of the stacks flew off and now I'm down to 3. I need to...
  4. Bama704

    Anybody familiar with Suzuki Katanas?

    I just bought a 1982 suzuki katana 750 and It does not have a headlight or the bracket. Anybody know if there are any other models that would fit my bike?
  5. Bama704

    KZ900 - updated suspension

    Thank you.
  6. Bama704

    ZX6r (04) forks & kerker header for sale

    I have an extra set of 04 ZX6r forks if anybody is interested. They will need new fork seals. Have not used them, I bought them in a big parts pick up and do not need them. $150 I will pay for shipping in US. Kerker header, came off of my 77 KZ900. $400 plus you pay for shipping.
  7. Bama704

    The 2021 Meltdown Show in Hendersonville, NC is this coming Saturday, 10-02-2021.

    I can't make it this year. However there is a big group from Charlotte riding up and will be camping.
  8. Bama704

    Kerker header for KZ900/KZ1000

    I'm selling my Kerker header and 12" reverse cone muffler. Just came off of my 77 KZ900. It has some scratches underneath, but there are no holes. Generally in good shape and it sounds great. Located in Charlotte, NC. $450 + Shipping
  9. Bama704

    PMC billet clutch release kit - anybody have one?

    I was able to get it sorted out today. I did not need to cut my push rod. All I did was loose. All adjustments, except had the push rod adjuster moved all the way in. Then I removed the mechanism and installed it 180 degrees. This gave me more leverage and allowed all to operate properly...
  10. Bama704

    modified, aftermarket, or custom. nothing is safe (78 KZ1000)

    I could stare for hours and marvel at what you've done. kuddos.
  11. Bama704

    PMC billet clutch release kit - anybody have one?

    Here is another view in case anybody has any input. I'm going to try and source a local clutch push rod and try my theory out on the second one.
  12. Bama704

    PMC billet clutch release kit - anybody have one?

    I bought the PMC kit and while it arrived quick and it looks great, it came with no instructions. I'm at the point, where I can not get the clutch adjusted at all and if I torque down the bolts there is zero movement in the clutch mechanism. Anybody installed one before and have any tips. I...
  13. Bama704

    DGR 2021, May 23rd Worldwide!

    Who all is riding this year and where at? I will be riding in Charlotte, NC on my 1977 KZ900 If you are interested in donating to a great cause, I would be honored to ride with your support. https://gfolk.me/adamvater296325 On Sunday the 23rd of May, I'm riding in The Distinguished...
  14. Bama704

    Z1/Kz900/1000/1100 Go Fast-ish Parts

    Good stuff here, wish I had some money I could make an offer for.
  15. Bama704

    KZ900 - updated suspension

    Thanks! Took it out on a 100 mile ride last night, it felt great!
  16. Bama704

    Webike Global - Get the hard-to-find Old Japanese bike parts here, also giveaway

    Agreed. I have ordered a few times from Webike and have had great results and fast shipping. Will happily order from you again.
  17. Bama704

    KZ900 - updated suspension

    Made some progress and almost have it all finished. Got the speedo/tach wired up, front fender mounted, rear tire centered and a bracket made for the rear MC. I had to fab out the centering of the tire since I had to have some spacers machined up. Took it out for a spin yesterday and I'm...
  18. Bama704

    Oil Leak Top End

    I have no advice for you on this, but wanted to say this is one cool ass picture.
  19. Bama704

    1965 Honda CA95 Benly Touring (baby dream)

    *Updated Price $3200* I am selling my 1965 Honda CA95 Benly Touring (baby dream) located in Charlotte, NC 28211. It comes with the solo seat as pictured, but I also have the double seat as well as rear pegs. But considering it is a 150cc it is really only a single seater. I have been up to...
  20. Bama704

    KZ900 - updated suspension

    Thanks, have your headlight ears on this build, looks great.
Top Bottom