We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Some you you here might remember me. I kind of fell out of the habit of coming here for no particular reason.
I had a custom bike shop In Horsham, PA, (A suburb of Philadelphia.) I gave up the shop nearly 2 years ago after some terrible complications of prostate surgery that left me 100%...
You can try fixing it.
Chisel any remaining tube level with the aluminum.
Drill it out with a #25 drill bit.
Get a length of 5/32 OD brass tube. (Available from hobby shops and some hardware stores.) Make it 1/2" or so longer than needed. Heat the tip with a torch to anneal. Peen the tip to a...
You will NEVER get the jetting right until you throw away those shitty Emgo pods. They partially block important openings in the mouth of the carbs. Not only that, they are metal mesh, and fine dust goes right through them.
Get the correct K&N pods and save yourself some drama.