Search results

  1. SoyBoySigh

    Rim 1.85x18" 36-spoke ( big drum) Takasago Alloy (auction sez 19 pics show 18)

    http://www.ebay.ca/itm/NON-SHOULDERED-EXCEL-TAKASAGO-RIM-/252394847756?hash=item3ac3e7be0c:g:NuoAAOSwAoRXF8Hi An alloy rim, 36-spoke drum-drilled, WM2 1.85"x18" Takasago, (auction listing says 19" but pics don't lie) Seems like a VERY choice rim for a rear wheel of a KZ400 or CB350F/CB400F...
  2. SoyBoySigh

    RIM 1.5x18" 40-spoke Akront- looks good for lightweight KZ400 KZ305 fr DRUM imho

    http://www.ebay.ca/itm/AKRONT-STYLE-SHOULDERED-RIM-/252394847473?hash=item3ac3e7bcf1:g:HTgAAOSwiYFXF7-X Akront 40-spoke 1.5x18" is SLIGHTLY less wide than the 1.60x18" 36-spoke stuff from the front end of CB350F & CB400F, or the 40-spoke from KZ400's - SEEMS like it should lace up good to a...
  3. SoyBoySigh

    Aluminum wire-spoke rim 1.5x19" 36-spoke - lightweight "marzorati" great price!

    http://www.ebay.ca/itm/MARZORATI-SHOULDERED-RIM-MADE-IN-ITALY-/252394846895?hash=item3ac3e7baaf:g:TrYAAOSwgk1XF74z Was surfing for the rims I'M after, and found something for the low-budget vintage-race-replica crowd. IMHO would be cool on some type of early '60s style lightweight twin or...
  4. SoyBoySigh

    Seeking Suggestions, a compact headlight for bubble-fairing

    Hey there. Welcome to the thread. Thanks for popping in. I mean, whether you can help or not - thanks for taking the time! I'm looking for suggestions for a compact HID headlight system. Ideally with a lens & housing, but if the better systems come without a housing, I guess I'm asking for TWO...
  5. SoyBoySigh

    WTB sprocket-carrier / cush-drive '77-'82 CB750K CB750C

    Hey I'm looking for the wider chain-line type of cush-drive sprocket-carrier, from the '77-'78 CB750F2, '79 CB750K (-zabc/DOHC) or '79-'82 CB750C Custom. Four lug cush-drive, not the five-lug from '79-'83 CB750F/CB900F/CB1100F etc - not the EARLY type SOHC carrier either. The type to suit the...
  6. SoyBoySigh

    WTB: handlebar switch cases throttle side - Honda CB750 SOHC etc, KZ400 too

    Hey. I'm looking for just the Aluminum bodies here, so the switches inside, the plastic knobs etc - could all be fried right out for all I care. Just so long as the cases aren't too terribly cracked. Mostly looking for the TOP half anyhow. Gonna modify 'em in a way ya'll might appreciate...
  7. SoyBoySigh

    WTB: KZ400 Deluxe or GT750 '72 LUGGAGE RACK or similar

    Hi - I'm looking for a KZ400D Deluxe or GT750 early style luggage rack. That whole style with the clean chrome tubular steel only, longitudinal rail, knobs for bungee hooks on the bottom, etc. Wanna fit 'em to my '82 CB900F/CB750F with modified tail "CB900K0 Bol Bomber" AND to the "KZ440LOL"...
  8. SoyBoySigh

    Honda DAX plus-size - Guzzi Nuevo Falcone or Aermacchi Ala D'Oro engine???

    I want to take an Aermacchi Ala D'Oro (Ooh ha-ha, my spell-check corrects "Aermacchi" as "EARACHE" ha-ha!) Or let's say, a Guzzi Nuevo Falcone - just the engine. And I want to make an "adult-sized replica" - of the HONDA DAX!!! Picture it - I've got some rims I've made with Suzuki 4LS drum and...
  9. SoyBoySigh

    Borrani rims for SOHC CB750K/F

    http://www.ebay.com/itm/COPPIA-CERCHI-ALLUMINIO-ALUMINUM-RIM-Honda-CB750-PROFILO-TIPO-BORRANI-RECORD-/221145236037?pt=Ricambi_e_Accessori_Moto&hash=item337d488245 I don't think a lotta folks realize that Borranis are so much cheaper and also available new for that matter, as I keep seeing...
  10. SoyBoySigh

    CHEAP/COOL Hurst ultimate retro cool disc brake stuff DIRT CHEAP

    For those of you who KNOW what this stuff represents, this is just a head's up. For those of you who DON'T KNOW - well I'd suggest you do some searching around and look into the subject, 'cause this is true hot-rod retro-cool equipment I'm talkin' about here...
  11. SoyBoySigh

    Wanted: the passenger peg "triangles" you chopped off your bike!

    I'm offering to pay for your trash, hopefully you haven't thrown them out already. I've already posted a thread about what I'll be doing with 'em. So I'll just link it here. http://www.dotheton.com/forum/index.php?topic=35783.new#new -Sigh.
  12. SoyBoySigh

    Need Measurements for Seat pan, CB750K0 Sand-Cast for "Duck-tail" DOHC project

    Hey there people. I was hoping that somebody would have a blank seat-pan sitting around from their SOHC CB750K/CB750F project, and that they could measure it out five or six different ways, and help me out with the major variables so that I can draw up a template of my own, to build up from...
  13. SoyBoySigh

    Wanted: chopped-off SOHC passenger peg triangles to weld to my DOHC CB750F!

    Hey there, I'm building my old '82CB750F, doing a wire wheel swap with fat radials, changing a lot of body-work, etc. Not so much a Cafe, as a tribute to the "Sand-cast". See where I'm going? SO, I keep seeing that a lot of you guys are chopping off your tubular steel passenger peg...
Top Bottom