Search results

  1. I

    bought! now a project!

    hey everyone its been awhile. update on the bike is, i got the bike running, got the tires on, chain on, and sorted out the fork issue. things to do be done on bike is... adjusting clutch cable, install rear sets and the bike should be ready to roll! I'm excited!! So quick question about...
  2. I

    bought! now a project!

    I will definitely take all your guys consideration into the forks. I will be taking them out of the triple trees and check them for straightness. I don't want to be riding it in the future to find out that it's not straight. Thanks for everyone's feedback on the forks. I will work on them and...
  3. I

    bought! now a project!

    I went ahead and got my rear sprocket assembled. I'm wondering if u can actually tighten the 4 bolts? When I try to tighten the bolts they just keep spinning. I'm not sure if the front looks straight or not... if you pan down it doesn't but if you look straight at the bike, it does. My...
  4. I

    bought! now a project!

    @xb33bsa I went ahead and checked if they were bent with a straight edge and they both check out! Should I switch the axle to the other side? Sent from my SM-G928T using Tapatalk
  5. I

    bought! now a project!

    I'm back! So when putting into front Tire it doesn't seem to be allighed straight. The manual shows the spacer on the right side of the bike. Is this how the wheel is suppose to sit or am I missing something ? I haven't tightened anything up yet but looks like I'm missing something Sent...
  6. I

    bought! now a project!

    Went ahead and bought wheel from mikes. And they just arrived what do u guys think of them trying to see if this is a bend ..?
  7. I

    cb350 wheels

    anyone have complete cb350t front a rear wheels? rims? that are in good condition? Please let me know.
  8. I

    cb350 rim

    lowered price!
  9. I

    cb350 rim

    i said knick instead of bent lol sorry. posted the last picture to show it.
  10. I

    cb350 rim

    no want to trade for a stock or any other brand that they painted black. sorry for any confusion. But yes i want idential sizes for rim. one of the rim is bent. since i have no experience on fixing it i might as well sell it for cheap.
  11. I

    cb350 rim

    i have for sale two cb350 rims made from mikesxs. 2.15x18 36 spoke shouldered rims. it will just come with rims, no hubs or spokes. it has a slight knick in it. if you know how to deal with rims its a great deal. trying to get it off for 50 + shipping for dotheton members or i want to...
  12. I

    bought! now a project!

    the thing about bending it back seems too strenuous for me to handle. I plan to sell the rims probably 100 for both. mike offered to sell me a new set or rims at a discounted price of 25% off. should i take him up on this offer? or should i save some money and opt to get some excel rims? i...
  13. I

    bought! now a project!

    Thanks for the reply guys. I tried to get pictures but it's hard to take picture of the bends. And I could really only find them on one wheel. Should I go to a other shop and have them true and mount the tires? Do you think this would cause a problem for me with the little bend that it has...
  14. I

    bought! now a project!

    Just by looking at it it doesn't seem like there is anything wrong but if a professional show u, u can tell Sent from my iPhone using Tapatalk
  15. I

    bought! now a project!

    bought! now a project! So a quick little update. I ran into a problem with mikesxs rims....[emoji35] got me pretty upset. Since I don't know anything about truing rims or conditions of rims I decided to buy a new set from mikesxs. Bought both of rims to stock pile my parts until I could save...
  16. I

    bought! now a project!

    figured it out! i just grinded the screw down to have a little more grab and it worked. thanks Sonreir
  17. I

    bought! now a project!

    i can only get it to screw in from slotted end. in this post http://www.hondatwins.net/forums/48-engine-discussion/36842-cb350-clutch-adjustment.html he has it facing the opposite direction. Sent from my iPhone using Tapatalk
  18. I

    bought! now a project!

    that is the exact picture that i followed. but shouldnt #6 have the screwdriver side facing away from engine so that you can adjust it from the outside?
  19. I

    bought! now a project!

    Okay so the screw shouldn't be screwed on the inside. It should just sit on top. Should the sequence be like the picture shown? Sent from my iPhone using Tapatalk
  20. I

    bought! now a project!

    I'm working on my clutch crank case cover and was wondering if the weird double sided screw, screws into the ridged circular thing. I'm having a hard time getting the screw to go though. I don't wanna force it and strip it. So any answers would help! Thanks. Sent from my iPhone using Tapatalk
Top Bottom