We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
any luck with the VT route? I did a little research and it looks promising but no confirmations yet.
i'm in RI and i have a bill of sale for a bike bought from Craigslist. My problem here is that the person I bought it from is not the last registered owner. The DMV was NO help and the police...
baffle!!!
I've been riding illegally for about a month on a sporadic basis and loving it. the other morning I was kicking to start, and the baffle came loose, I wedged it back I'm and rode to work. it came loose one my way in, twice.
without the ability to weld, does anyone have an idea for a...
doc_rot thanks for the heads up and your input. I'm clearly a noob so any and all help is greatly appreciated. I'm hoping to swap the cover this weekend, throw the battery back in, add fresh gas and try to kick back to life.
When I get it started and ride around a little but I'll have a better...
as it's been a while since she's run and i'm really anxious. is it bad to kick her and let her run with that cracked, maybe take her for a spin around the block?
cheers teazer! bidding on the polished one and hoping it fits!
furby - it's been a rough year and SLOW getting her up and running. a lot of it has been my own fault and the fact that life gets in the way of the fun stuff! this was just bad luck.
as much as i love winter and snow, i can't wait for the warmth.
yesterday, we had a wintery storm up here mainly consisting of crazy winds. i came home to my bike lying on its side. I removed the cover lifted it back up and noticed a cracked and broken cover on the right side near the brake. i...
it's been a while since i've posted any updates.
this summer quickly escaped me, i did some wrenching of my own and after a while i went the "easy" route. I went to a mechanice that works on my friend's xs400. i felt more confident going to him to do engine work. i asked him to get it running...
i have title and paperwork. i got the bike in a trade.
CONS:
- it does not run.
- likely needs a new battery and clean spark plugs.
- dent on the gas tank
- no button for the ignition, you have to use an allen wrench to push the button in.
PROS:
- new tires
- new exhaust (says the previous...
ok, stator cover on after some muscling.
kicked it and she started after a few kicks. the only problem is that a carb is leaking quite a bit. that is an issue far beyond my skill set, tool set, or work space. i will be bringing my bike to a referred mechanic to give it a once over, get it...
i found one for $25! i was so pumped when i found it, i should be getting it and installing early in the week. with the extra money i planned on spending i bought a new headlight bucket with housing, rim, and retainer and a new set of blinkers.
the blinkers i initially bought were not working...
you're right, i also shouldn't have been riding without bleeding the front brakes. i grabbed and they weren't there, you live and you learn.
thank you for the help!
HUGE thanks for the help! i have been scouring the interwebs and have come close to pulling the trigger but haven't, i will keep digging.
my next step is wiring, i purchased turn signals and i need to wire them in.
The issue (likely a minor one): the connectors from the blinker to the bike...
looks killer, psyched to see the finished product! i'm working on a kz650 brat/tracker myself. how did you adhere the pad to the foam? once she's running and road legal the seat is next on the list.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.