Search results

  1. Djfob

    Cb360 fuel in the oil?

    Bringing back a thread from the dead with the same issue, went through it all and everything looks good. I'm boggled in how in how in how feel is getting into the oil. Petcock works as it should Seat valve looks good, seat is clean Overflows work. Have it on the bench right now with an...
  2. Djfob

    Cb360 no power under load fine at idle.

    Hmm how would I know if it's venting? Sent from my ONEPLUS A3000 using Tapatalk
  3. Djfob

    Cb360 no power under load fine at idle.

    Static timing and compression is 170....160. Going to pick up a strobe next few days to check advance, been waiting for it to go on sale and final has. Sent from my ONEPLUS A3000 using Tapatalk
  4. Djfob

    Cb360 no power under load fine at idle.

    Carbs were rebuilt by crazypj to run pods. I'll have to ask but I'm pretty sure we stuck with stock jets. Thinking I'm going to try 115s since my exhaust setup is short and open. Change out the old diaphragms to rule out air leak while I'm at it. Sent from my ONEPLUS A3000 using Tapatalk
  5. Djfob

    Cb360 no power under load fine at idle.

    I've been diagnosing my cb360 as a misfire, all spark related parts are new and timing is spot on. Now looking at it being a fuel delivery/lean condition? Under load I can wrap the throttle it barely gets up to speed, will get nowhere near redline, *lack of hp and slight hesitation like it's...
  6. Djfob

    Cb360 misfire has me stumped

    Hmm I'll have to double check, I'm using one of your regulator rectifiers with an earth x 12a Sent from my ONEPLUS A3000 using Tapatalk
  7. Djfob

    Cb360 misfire has me stumped

    Just finished this build with all fresh wiring, only wires never changed is the yellow and blue wires coming from the points. So one day out for a cruise bike misfired to a point where left cylinder went cold. Idle seems fine but high revs bike gets jerky with no power. Just swapped in new...
  8. Djfob

    Acewell 2853 rpm jumpy

    I've installed an inline 1k resistor and it's slightly jumpy on my cb360. Did the same thing on my k8 cb750 and it's steady. Any ideas? Bigger resistor or double up? Thanks Sent from my ONEPLUS A3000 using Tapatalk
  9. Djfob

    Cb360 regulator rectifier wiring

    Wiring up from scratch and wanted to confirm something. From what I understand the stator is a 2 phase where the white and yellow are combined when the headlight is on. So what I'll be doing is hard wiring the white yellow together and running it to the new reg/rec along with the red coming...
  10. Djfob

    Motorcycle Photography Tips (smartphone)

    Lightroom is what I also use, edits do wonders to pictures.
  11. Djfob

    Cb360 rear brake pedal swap

    Looking to get rid of the cb360 pedal that runs under the frame. Can the cl and cj rear brake pedal be swapped on with matching brake cam?
  12. Djfob

    Cb360 gas tank

    Far fetch ask but looking for a mint gas tank. Long story short I ended ruining mine trying to fix it. Even consider cl360 tank
  13. Djfob

    Cb360 battery wire gauge

    Rewiring from scratch as most components have been moved around. Can I get away with 8 gauge wiring for main ground, battery and starter wire? Oem wire measures 7.5mm with insulation
  14. Djfob

    Super stiff clutch that is hard to pull

    I fixed same issue with a new oem cable Sent from my iPhone using Tapatalk
  15. Djfob

    J-Rod's 82 CB750- AKA Giselle

    That dipstick looks killer!
  16. Djfob

    Electronics -safe under the seat?

    Overheating no but yes to a sweaty ass on summer days
  17. Djfob

    what type of handlebars should i get?

    Can't go wrong with a set of super bike bars
  18. Djfob

    Honda Parts!

    How much are the tach plugs?
  19. Djfob

    CB360 aftermarket push/pull throttle Dime City Cycles

    Yep motion pro push pull and it works fine on the cb360
  20. Djfob

    Question for anyone with emgo shorties

    Awesome! Much appreciated
Top Bottom