Search results

That is encouraging to know. I wonder if you could end up with adjustable mounting plates so you could adjust the weight bias when it is all together. I probably wouldn't matter in the practical world, but it would be cool.

Looks like plenty of room, but there is lots of distance between the countershaft and the swingarm pivot if the engine is that far forward. If you were to move it back in the frame, would it move the weight bias too far to the rear?

I really like the look of the Dresda swing arm with a featherbed frame. I think this will be a very cool project.

I tend to like the OEM bar bend for the 1975 CB400F, part # 53100-377-000. It is unavailable from Honda, 4-1 lists a reproduction for $35. I also like to run replicas of the K&N Superbike bar in black, but they are also available in chrome. As far as running the calipers either in front of the...

Man, you guys are old. I won't be 68 for another 3... months.

It may be time to get rid of the Bing CVs and put on some round slide Mikunis.

Once again, Doc is right with what to do. However, that is not what I would do since I am cheap and I like to make things work. To me, there are 3 potential problems; 1. the bore is glazed over and the rings are fine but not sealing well. Deglazing the cylinder and making sure the rings move...

I agree with what Doc said about your front end geometry. I'd also be concerned about the width of your front tire. A 110 is pretty wide and will give you very heavy steering. That along with the dropped forks could be very weird and potentially evil.

Do you want a red tank or a black one. It will be yurs for the cost of shipping. I think the black one only has a smallish dent and the red one has a bigger dentt. They are both raceable as is.

I have a couple of spare tanks that will go cheap if you have any interest. I also have spare carbs and a couple of radiators. Have I mentioned that they will go really cheap? We are selling our house and I need to empty my garage.

That cam chain tensioner would be a big NOPE for me. Too many cracks in the slipper material. When the preces come off and clog up the oil pump screen and the cams jump time so you bend a bunch of valves, you will be wishing you had replaved it.

I still find it to be an interesting reference to a horse in a 400 year old novel that has not been read by very many people in this century. However, rest assured that I find it to be a wonderful name and very appropriate to this project.

Looking good. I haven't seen where you mentioned the reason for the name. Isn't that a fairly obscure reference to a horse?

Looks really nice. I ran a pair of those rear rims on my CB350 race bike back in the 80's and developed some cracks in the rear rim. I don't know what caused the cracking, but it was only on the rear rim in 2 different places. They were pretty used rims when I laced them up and I have not heard...

I used a different ground cable on the last battery I mounted there. I think I ran it to a motor mount bolt or someplace on the frame. I didn't see a good way to use the stock ground. I just found one in my spare wiring stock. It was probably off a CB350 or FZ600.

I almost always run into the same issue with racebikes. If I have to run the stock airbox, I don't like the idea of running the oil vapors in there and if I am running superbike classes without the stock airbox, the rules state it has to run to a catch can. I usually use a brake fluid can it is...

I did the same with the electronics on the last one I did. With the stripped down race harness it made the packaging pretty nice. For a race bike, it just made sense. Yours is looking good.

Hey Irk, I am glad to know that you and I are now mates. I had an interesting conversation with a guy at the Mid-Ohio swap meet that was selling Chinese rims and clip-ons. He lived in China and worked directly with the manufacturers. His take on it is that you can get any quality of product if...

Thanks for the reply, Sparky. Have a nice day.

I hadn't realized that this was a competition based solely on how long you have been working on customizing bikes. SInce you have been building customs since the 60's, you have me beat by about 10 years so I would be foolish to make any comments about how you are doing any of these...