Search results

there is a green honda mini trail i seen that was slammed with white wall tires i really want to find another pic of it. it was so cool i think im gunna go the same rout, but im also gunna put a lifan 140cc motor on it, i put the china 50 from my sons quad and it basically bolted right on so no...

ill post some pics of inspiration

not sure which way i want to go with this bike.. i seen a ct70 that was bobber style but im thinkin of putting rear set and clip ons..

in tacoma WA got a 90 cr80 no title 80cc 2 stroke water cooled 5 speed needs only a piston ring can findem online around $5 i needs parts for my 81 honda 400cc or $350 cash meintro-bidnez1@hotmail

my bike has the push pull throttle, and i cant find a decent set of used controls, will a regular single line throttle cable work? any tips? i guess i could try it with some of the parts i have layin around but figured id ask, this is a project so its not like im gunna do it and go ride on the...

Re: question about witing... thanks guys, i have a whole set of wiring tools already, wasnt cheap either. i have re-wired a few bikes, but only my honda 50 and some of those little chinese street bikes and my old dt100a, nothing to serious. but this bikes wiring looks WAY more complicated...

Re: question about witing... ok thanks guys, the wires are not too bad, they are just dirty, but all of the plugs disintegrated as i pulled them apart.. and im not exaggerating. and the fuse block looked fine until i started swapping fuses and noticed i wasnt getting power out of it.. btw i...

my 81 honda's wiring is crap.. its falling apart etc fuse block is falling to pieces.. it stopped turning the engine over when i was trying to get spark. tried switching the fuses out.. still nothing, the coil is good as tested on a running bike.. anyone have a link to a diy wiring harness...

81 cm400t looking for advice on custom wiring, my harness is garbage. also battery relocation no pics today but its all stock with some cruiser bars lol i got originals to use till i get the front end (gunna do a street bike conversion)

have a good working 32mm mikuni vm slide carb. works fine asking $75 + shipping from Tacoma WA 98409 will post pics as soon as i get some (no camera)

i have a complete frame i dont need. it has an adjustable coil over mono-shock and bypass damper (i think that's what its called). the swing arm is aluminum and would look sick on a cafe! everything is there, all you need is some good fabricating skills asking $250 for the frame -- in Tacoma...

well i got some spare time so i sprayed the engine down with de-greaser, and it ruined the side covers, it etched them out and made them look like sh*t... i guess im painting them.. ugh, at least the cylinders and heads still look fine.

hey guys stripped all the stock plastic stuff off, i seen a bike on here where the guy used a skate deck for a brat style seat lol so i figured id try it just cause, might be stupid but its gunna be a free project lol if it dont work out my bro can fiberglass me a seat. gunna start cuttin metal...

unfortunately its a shaft drive, but i think some viragos might have come with the spoke wheels. im gunna make it naked to all hell! lol took the cluster and rectangle headlight off already, i think im gunna get some small "fog lights" at autozone for my headlights, the small round ones.. would...

cool man! i was gunna do a 74 dt100 i got for $180 but then i sold it and got a bigger bike lol

hey i got some aggravating news, started taking stuff off the bike today, well i think im gunna be stuck with this tank cuz the tunnel is HUGE!! dont think there will be another bike with the same size tunnel. and the "stock clip-ons" bolt to the top triple tree. so im thinkin of swappin a...

Re: My first Cafe Racer Build: 1980 Yamaha RS 250 hey man where r u located? i dig ur tank if you get rid of it let me know im in south puget sound WA tank on my bike is way too big, yamaha xz550

Re: gunna be a weird one hey guys i think i might just keep it, the only bike around i have found that looks almost identical is the honda vf500, looks almost like its cousin... i have decided im gunna ditch the tank and tail/seat all together, the tank on it has a pretty bad dent...

Re: gunna be a weird one yeah its a vision, yeah it has stock clip-ons but they suck lol i think i might just flip them upside down for now. here is kinda what i wanna do, mix the seat and tail of the first one with the front of the second one

hey guys, i just got a bike that no one seams to like, lol, but i got it pretty much for free, i traded a 50cc for it.. i got it running in about a day but i still need to do some electrical work, im tryin to sell it on craigslist so i can get a smaller honda, but since no one likes them its...