Search results

  1. Hutch

    Cleveland to New Philadelphia

    Anybody have a good route from Cleveland southwest or south suburbs to New Philadelphia. Looking for some winding and/or scenic roads, no highways.
  2. Hutch

    1982 CB750SC project

    try CL MOTOTECH https://chrislivengood.net/clmototech/. i have some on my '82 cb650sc, basically the same frame and fork, great shocks. I raised the rear about an inch, very happy with how the bike tracks.
  3. Hutch

    ** PICS OF MEMBERS RIDES ** - Official Before & After Thread

    When I bought it, the first incarnation in rat bike mode, and now...
  4. Hutch

    Transformation of 1995 Kawasaki EN500

    This...
  5. Hutch

    High idle help

    I got my bike started, 1982 cb650sc, but its idling at 4200 rpm. I couldn't find anything in the manual, or online related to idle adjustment for CV carbs. Here are the changes made since removing the carbs. complete carb cleaning and rebuild replaced vacuum-assisted petcock with a regular...
  6. Hutch

    CB650 getting ready for first start

    All I have left is to bleed the front brakes, then first start. I swapped tanks from stock, the fuel line has a very slight up hill. I hoping this isn't any issue ??? since its only about a 4" run from the petcock to the carbs (see pic below). Here's my first start procedure pieced together...
  7. Hutch

    Dimmer switch high/low light fix

    New controls it is!!! Scored one on ebay got $16 shipped.
  8. Hutch

    Dimmer switch high/low light fix

    Can anyone tell me if its possible to rebuild the dimmer high/low switch (1982 CB650SC). More specifically, there is small copper contact plate with a spring underneath (first pic below) that is not making good contact with the wire contacts. As a result the head light wont stay on. I cleaned...
  9. Hutch

    Honda Cb650 - Trying to decide how to finish tail

    Sorry to mislead, the white one is not mine, but close to what I'm doing. I chose to keep the frame in tact with the exception of lowering the rear fender brace and trimming a few tabs. Also removed the large frame stand and mounts in favor of the side stand only. This was done mainly for...
  10. Hutch

    Honda Cb650 - Trying to decide how to finish tail

    Here's an example of what I'm talking about, only with a rear hoop. Quite frankly your seat detracts from an otherwise very nice bike. If you want to keep the fender brace in tact, consider creating or trimming your existing seat pan along the bottom edge to follow the lines of the frame. I...
  11. Hutch

    Honda Cb650 - Trying to decide how to finish tail

    I'm working on a cb650, cut off the rear fender brace and remounted flush to the frame. Created a seat pan that follows the bend in the frame to run a brat seat. I don't have any pics accept when I was just starting the mock up (not trimmed to size at this point). I'll add a rear bobbed...
  12. Hutch

    Honda Cb650 - Trying to decide how to finish tail

    Why not a cowl mounted to the fender brace sort of like this...
Back
Top Bottom