Search results

Thank you brother, I always try to make where the tank and seat or tail section meet look nice on all of the bikes that I build so it is very nice to hear that you appreciate the extra work I did to get a nice fit on this build. When I built the steel seat pan I made it to fit under the tank...

Yes, I was very happy with the jetting and I normally like my vintage engines to be a little on the rich side. I will look at the build information and find the carburetor kit for you. We used the original cushions as they were in good condition. The front fork brace is the original brace that...

I am happy that you all like this build brothers, your compliments and support mean more to me than you know! Brother zap2504 we installed Mikuni carburetors that came in a kit with the intake manifolds and a new throttle with cables etc. and the bike felt really good to me for my riding style...

Thank you for the compliments brothers, as always your support means more to me than I could ever put in to words!

Thank you for the compliments brothers, here are some more new photos for you all to enjoy!

Thank you brother, that truly means a lot to me my friend!

Here are a few more photos of the bike after it was finished!

These photos show the top end after I rebuilt it and had it ready to go on the engine and the complete engine with satin black paint and the engine covers that I polished!

Here are some photos that show the custom seat cover on the pan that I built to match the shape of the rear of the fuel tank and the new rear frame section!

I built a steel axle mounted tag mount

Here are the wheels mounted on the bike with the brake and the belt to chain drive conversion!

I painted the front and rear rims, rear brake plate, etc. satin black to match the frame and engine and mounted new tubes and tires

Here is the factory KZ440 fuel tank with the sides filled and smoothed, the original gas cap removed and replaced with a flush mount assembly, and painted a beautiful red color!

Here are a few photos of the frame after I completed all of the custom frame work and painted it and the swingarm satin black

Here are the front forks after the new seal were installed and the lowers were painted satin black

These photos show the triple trees after I smoothed the top tree, painted them satin black and with the new Atach GPS speedometer on the new mount that I built!

I finished this build last september and I thought you all may enjoy some photos! Here are before and after photos of the bike we started with and how she looks now! The build sheet! DWMS Racing modified factory KZ440 frame with ignition switch relocated in to the front of the frame...

Brother bluesmokey decided to have some new gold leaf lettering and graphics made to go with the beautiful starburst whole earth metallic and black paint work that was done by my Brother Jason on the fuel tank and the tail section that I built so I shipped them to him and I got them back today!

Re: DWMS Racing RD350 Cafe Racer! New Front Brake System Photos! I worked on finishing the front brakes for the RD350 build today and installed a new master cylinder, a custom made Spiegler black stainless brake line, and a factory brake caliper I rebuilt with new seals and brake pads that I...

CB750 SOHC DWMS Racing Ported cylinder head, port matched intake manifolds, port matched intake and exhaust seats, ported intake and exhaust ports, smoothed combustion chambers, new two angle valve seat cuts, competition valve job, lightened factory valves, new valve seals, and new satin black...