Search results

  1. wfo speedracer

    1963 Suzuki Colleda Black Betty cafe-ish build

    I looked at the speedo cable today , I have a 78 CB125 that I was able to rob the cable off of, the cable fit the drive as I suspected it would so I cut the ferrule off of the old cable and the ferrule off of the CB cable. I was able to unwind the housing and get the rest of the cable out , I...
  2. wfo speedracer

    1963 Suzuki Colleda Black Betty cafe-ish build

    Removed the engine and ground the frame. I was able to move the engine about 1/4" to the left, the new chain came in today and it looks like we are in business ! I snapped a pic of the magneto cover as it had to be trimmed up as well, by looking at the first pic and then the second you can see...
  3. wfo speedracer

    1963 Suzuki Colleda Black Betty cafe-ish build

    Test ride was successful as in everything worked and it didn't break down however when I went to put it up yesterday the chain popped off, this is the second time it has done so both times at no speed. I decided I needed to have another look at the sprocket alignment. On a normal bike this...
  4. wfo speedracer

    1963 Suzuki Colleda Black Betty cafe-ish build

    when I pull off the front wheel again to do some polishing on the hub I will see what I can find as far as stamps or part numbers, luckily the brake shoes are good so I shouldn't need any parts for this setup for a while.
  5. wfo speedracer

    1963 Suzuki Colleda Black Betty cafe-ish build

    I guess where the confusion is here is that the brake levers are original Suzuki T10, I got them off of Ebay and put them on this brake backing plate, this backing plate didn't have any, it looks just like the one you posted with Suzuki brake arms attached. I already have it all mounted on the...
  6. wfo speedracer

    1963 Suzuki Colleda Black Betty cafe-ish build

    Here is a pic of a GT380 backing plate, while it does have a brake arm stay it also has a notch and the speedo drive does not have a screw, I will post a pic up of the brake backing plate on mine later today, the wheel may be a GT380 IDK it came with the bike as did the backing plate, I did...
  7. wfo speedracer

    1963 Suzuki Colleda Black Betty cafe-ish build

    So looking at this front wheel, I can't find anything Suzuki that matches up to it, I have been searching and looking at different front hubs and I believe this is a Honda 350-360 brake backing plate, two things I noticed , most of the Suzuki backing plates have a slot to locate the plate, this...
  8. wfo speedracer

    1963 Suzuki Colleda Black Betty cafe-ish build

    I was able to sort the carb out using some parts off of an power equipment old carb and a conical shaped spring that I cut in two, while I had the choke plate out I was also able to glance inside at the intake to carb mismatch,it was pretty bad so I addressed that with a die grinder and a...
  9. wfo speedracer

    1963 Suzuki Colleda Black Betty cafe-ish build

    Updating the thread with a few pics, I extended the left footpeg out with a spacer, cut up and rewelded a brand new heel toe shifter and welded some 1/4" stock to the bottom of the centerstand, I do have to weld a nut to the exhaust pipe for the heat shield and then all the welding is done. The...
  10. wfo speedracer

    1963 Suzuki Colleda Black Betty cafe-ish build

    Made a bit of progress yesterday , I got the engine mounted solidly, I also sorted out the carb mounting, the rear tire is back on , sprocket is mounted up and the sprocket carrier and rear brake backing plate have been polished up, the rear shocks are mounted, I had to go with CB360 rear...
  11. wfo speedracer

    1963 Suzuki Colleda Black Betty cafe-ish build

    Yep the sprocket arrived yesterday, I filled out their online form , about 30 minutes later i got a phone call, she said it would probably be on the UPS truck that day, that was Wednesday, Friday afternoon I had it in my hand and it fit perfectly.Another round of parts has been ordered, while...
  12. wfo speedracer

    1963 Suzuki Colleda Black Betty cafe-ish build

    Rear tire is mounted up, rear rim is cleaned and the spoke covers have been installed, I would have painted the spokes like on the front but this rim was very true and I didn't want to start over, custom rear sprocket was ordered Wednesday and they said they might get it on the UPS truck that...
  13. wfo speedracer

    1963 Suzuki Colleda Black Betty cafe-ish build

    Rear tire is in as is the tube and today the 15mm wider front sprocket showed up, it was a good call going with the 15 instead of the 7 as it lines up pretty much dead on the money, I also noticed it was a 428 sprocket instead of a 420, I really wanted 520 but nobody makes one for this...
  14. wfo speedracer

    Venduro DT360 build

    I am going to get back on this as soon as I complete the Colleda project, just brought it back up so you will know it's not a dead project .
  15. wfo speedracer

    1963 Suzuki Colleda Black Betty cafe-ish build

    Front wheel spacers came in as did the tap for the front fork leg, everything went smoothly, the fork leg tapped out (pun intended) and the spacers were the perfect length so know the front wheel is centered and secured. I may have to grind down the boss for the brake stay arm a bit but it's...
  16. wfo speedracer

    Venduro DT360 build

    You guessed it , one of them is sitting in jail right now for theft , felony attempting to elude and other charges, the other one is long gone nobody knows his whereabouts. Point is these are the kinds of people the owner of the property chose to associate and hang around with.
  17. wfo speedracer

    Venduro DT360 build

    Yes Two Seadoo superchargers, a Seadoo jet pump with impeller, a 550 SX bottom end, the cylinder head and cam for my street tracked build, a pit bike complete engine, various rare PWC aftermarket Aluminum parts, multiple cylinders and heads off of ATV's and watercraft, multiple exhaust systems...
  18. wfo speedracer

    1963 Suzuki Colleda Black Betty cafe-ish build

    Heat shield came in, it started off as you see in the first pic, looked kinda sad so I whittled , beat and banged on it till I got something I liked as pictured in the second pic, it's a little too blingy for my tastes, some flat black should tone it down quite nicely though. I do need to weld...
  19. wfo speedracer

    Venduro DT360 build

    Local agencies did nothing except pass the buck, the property owner did nothing except drink beer all day, finally some friends of his drove back there on a 4wd tractor and found a beaver dam that was causing the problem . The property owner kept inviting drinking buddies down to the shop some...
  20. wfo speedracer

    Venduro DT360 build

    Problem solved I moved the damn shop !
Top Bottom