Search results

  1. my94f2

    starting the 75 cb550

    yes i did. but a buddy has ties to registration offices so he can restamp
  2. my94f2

    starting the 75 cb550

    you and me both. i'm tired of looking at it on the table.
  3. my94f2

    starting the 75 cb550

    havent posted in a long time. been busy with work, kids, ol lady, blah blah blah but get a chance now and then to mess with it. her's how she's sitting now
  4. my94f2

    starting the 75 cb550

    made these today. fender mounts. wqell not made but betterfied lol use some cheap brass grounding lugs. grinded the marks of and sanded and polished
  5. my94f2

    starting the 75 cb550

    was thinkin along these lines
  6. my94f2

    starting the 75 cb550

    it would almost have to be reversed of the tank the way the upper rear tapers in
  7. my94f2

    starting the 75 cb550

    electronics bag idea or
  8. my94f2

    starting the 75 cb550

    todays progress
  9. my94f2

    starting the 75 cb550

    really? i hosted them from photobucket. joe. theyre on my fb
  10. my94f2

    starting the 75 cb550

    finally got some time to work on it. so some progress got carbs all cleaned up. put some brass washers and some other little accents started the tank got my spokes in and laced up the 21x3.5 also made some bungs and brass washer/mounts
  11. my94f2

    cl77 brake arms

    buildin a tracker and using a scrambler/cb450 drum brake. the arms are rusty. cleaned up as best i could but still not happy. is there anywhere you can get em new?
  12. my94f2

    cb550 carbs

    i figure it will crack. so i would brace to help prolong that. after some research and running #s ima use vm30's. i was originally gonna just t to each cylinder. but gonna y it instead for better flow and better cylinder separation.
  13. my94f2

    cb550 carbs

    The plates not fixable. Snapped where the rod goes through, broke bronze bushing and opposite whole ear. Fell off shelf while hammering on the work bench. When i was gonna run a weber sidedraft my math says 28 venturis on a 40mm carb. So im leaning towards towards dual 32s dulled down a bit and...
  14. my94f2

    cb550 carbs

    The plates not fixable. Snapped where the rod goes through, broke bronze bushing and opposite whole ear. Fell off shelf while hammering on the work bench. When i was gonna run a weber sidedraft my math says 28 venturis on a 40mm carb. So im leaning towards towards dual 32s dulled down a bit and...
  15. my94f2

    cb550 carbs

    I know they do. Im makin my own manifolds out of copper. I just need to know the better sized carb. Like a 30 or 32
  16. my94f2

    1976 550fand k parts for sale ne ohio

    you have a set of carbs or the mounting plate?
  17. my94f2

    cb550 carbs

    well i broke the carb mount plate and when i built my frame i didnt think about the 2 center carbs and no go for airfilters. plus i would rather tune 2 carbs and not 4. i been lookin into a set of 32mm mikunis. but i dont know if maybe 30s would be better
  18. my94f2

    cb550 carbs

    i have a 75 cb550. has the 4 carbs. i wanna run 2. any recomendations?
  19. my94f2

    75 cb550 carbs

    needing a set of cb550 carbs or the mount plate. let me know if you have one
  20. my94f2

    starting the 75 cb550

    Put a buffing wheel on a grinder. Works much better
Top Bottom