Search results

  1. Bucky685

    1974 Honda CB360T- Bobber

    Bump... Still for sale.
  2. Bucky685

    1974 Honda CB360T- Bobber

    Thank you, glad you enjoyed the build. Sucks I need to let it go, but there will be another one. Hopefully in the near future, once I get some things figured out!
  3. Bucky685

    1974 Honda CB360T- Bobber

    No problem. Hope it can help someone out. It still incorporates a velocity stack. But links the carbs together like the stock set up.
  4. Bucky685

    1974 Honda CB360T- Bobber

    Here are the parts I used to create the air box. Then made a flange and welded a piece of pipe to create a slip joint. Then used radiator hose from the air box to the carb.. Empi 8737 http://www.amazon.com/gp/product/B0046VMU0C?keywords=empi%208737&qid=1453749338&ref_=sr_1_1&sr=8-1 EMPI...
  5. Bucky685

    1974 Honda CB360T- Bobber

    Thank you for your input. The air box is off the shelf parts wit the exception of the adapter flanges I made to connection to the carbs. I'll try to find the part numbers I used to create the air box. Over the v-stacks. It is running better. But it is still running too rich and will foul the...
  6. Bucky685

    1974 Honda CB360T- Bobber

    Here is a few of the air box
  7. Bucky685

    1974 Honda CB360T- Bobber

    CV carbs are picky to only velocity stacks. So I designed the air box in the second post, which is currently on the bike. I'll snag a picture of the new air box installed on the bike tonight.
  8. Bucky685

    1974 Honda CB360T- Bobber

    miles
  9. Bucky685

    1974 Honda CB360T- Bobber

    Bike before
  10. Bucky685

    1974 Honda CB360T- Bobber

    more pictures of items I designed.
  11. Bucky685

    1974 Honda CB360T- Bobber

    F/S: 1974 Honda CB360. Stock motor/carbs Custom intake Hard tailed Sportster gas tank Rear fender from 1930's ford spare tire cover Spring leather seat Kick start only Custom covered wire harness Harley 12" ape hangers Harley controls with new lines. New tires/ tubes...
  12. Bucky685

    Bucky's '74 CB360 Hardtail Bobber Build~"Root Beer float"

    Re: Bucky's '74 CB360 Hardtail Bobber Build~"Root Beer float" Why, thank you sir!!
  13. Bucky685

    Bucky's '74 CB360 Hardtail Bobber Build~"Root Beer float"

    Re: Bucky's '74 CB360 Hardtail Bobber Build~"Root Beer float" http://instagram.com/p/vWIVqgl0aF/ Sweet my bike made TC bros instagram page!
  14. Bucky685

    CB360 having some issues running properly!

    I pulled the plugs. Left/right respectively...
  15. Bucky685

    CB360 having some issues running properly!

    Have a few issues getting my CB360 running properly. It will start, idle. and run for about a block them will fall on its face when load is applied and die. I can get it restarted. And will do the same thing. If i let the bike idle for a minute, it will eventually not respond to throttle inputs...
  16. Bucky685

    Bucky's '74 CB360 Hardtail Bobber Build~"Root Beer float"

    Thanks. I am brining some tools along with. Jut in case, cause something will loosen up. Prob pick up a spare set of plugs tomorrow am.
  17. Bucky685

    Bucky's '74 CB360 Hardtail Bobber Build~"Root Beer float"

    Re: Bucky's '74 CB360 Hardtail Bobber Build~"Root Beer float" Apparently knowing people that know more than I do helps! A friend who owns a bike shop sorted the carbs out for me. Looks like I'm going to make my ride tomorrow! I'll post up the results of the real maiden voyage...
  18. Bucky685

    Bucky's '74 CB360 Hardtail Bobber Build~"Root Beer float"

    Re: Bucky's '74 CB360 Hardtail Bobber Build~"Root Beer float" Lol! It's a bit on the small side for me. I'm 6'3",200# I hope I can get it to 80. Still working out some tuning issues. Full throttle is good, but partial throttle ok. Starting from a stop it want to choke out and die...
  19. Bucky685

    Bucky's '74 CB360 Hardtail Bobber Build~"Root Beer float"

    Got out for my mayden voyage!
  20. Bucky685

    Bucky's '74 CB360 Hardtail Bobber Build~"Root Beer float"

    Re: Bucky's '74 CB360 Hardtail Bobber Build~"Root Beer float" Got to ride my bike around the block for the first time. Granted I didn't have a front brake or brake light. (Need a new fitting for caliper) But it put a huge fucking grin on my face!!! Getting the correct fitting tomorrow...
Top Bottom