Search results

that thing is cool right? very man cave....thats from a restaurant in las vegas that I went to.

Took it for a ride tonight and it lost compression.... :'(

My uploads from phone dont work... played with the seat some more added a fender and tail light still need to wire the tail light I managed to fix the kill switch and the ignition switch I pulled the vm 36 and the leg was broken off so i need to get a new vm36 carb body. I put the stock...

Covered the seat with the old cover and I just need to change the upholstery strips so the cover can reach the spikes. I ordered a new smaller pilot jet #20 from #25.

Having carb issues. Vm36 The air screw is turned all the way in the idle is turned all the way in and it’s running... Messed with the seat until I figure out what to do with the carb jets/settings I added upholstery strips all around and glued the foam back down I’ll shave the sides...

Did a little work, trying to see if I can make the stock seat pan work. got the carb fixed and working on idle, I have a 25 pilot in now and I have it about a .75 of a turn out. I will be testing out tomorrow to see if it still starts on first kick like it did this afternoon. front fender...

didn't really mean for this to post under this category.

I’ve had this bike for a little but just getting it going. Stator is good. It’s getting a nice spark, hard to start, idles, and then dies. Re cleaning the VM36 tomorrow. I’m hoping the float needle/jet is the issue. Only thing I didn’t change out. 3.0 slide this should be a 2.5 according...

lookin good, im workin on my third sr and might pick up an xt if the guy comes down in price.

Just waiting on carb rebuild parts...i have pieces coming in from all over the place... vintage spoke seems to always have some delay...but they also have everything under the sun for SR's. Diaphragms are coming from vintage spoke, I have a basic rebuild kit at home, and brass is coming from...

Some info: xs front fork, swing arm, and rear wheel. Wiring under th seat looks a little wild and it’s missing the left hand switches. The frame is cut under that big ass seat, the seat is big but comfy. Original carb super trap exhaust. Exhaust leak at the header and the diaphragms in the vm...

New whip

This is cool as hell, I like how you guys are trying stuff you have never gotten to try before and really gathering feedback from the members here.

first thought of the light guard! bad ass 8)

http://cnj.craigslisthttps://images.craigslist.org/00d0d_bRiUqb8WiZj_600x450.jpg.org/mcy/5808028176.html CB parts

mine was 185 the guy foamed, shaped, diamond stitched in vinyl looks like leather

Jersey pride/home town pride. Keyport a one square mile bay town

thanks I been hunting for one

I have a dual oil feed to the head, the exhaust banjo bolt backed out I replaced the banjo bolt and crush washer not realizing there were two crush washers, I had an oil leak, then I had no oil, then things melted :(

Make sure you tight everything or else... the piston is also melted to the connecting rod -_- who has replacement parts :)