Search results

Hi I'm having problems with how my bike is running. I've been working on carbs but what ever I do stays the same so now I'm thinking maybe timing issues. Is there any way to check to see if my standard electronic ignition is faulty .it also as a ignitor box .Can you test that .bike does have a...

Hi I've got a problem with my headlight low beam keeps blowing. It's powered from munit.any ideas why this is happening??

As the title says head light comes on when I press start button bike is fitted with m unit .and m switches.any idea why this is happening ??

Hi ive been making a wiring harness using motogadget m unit I have the coils powered from aux. I've noticed that the coils are warm when I turn the key on is this normal .the coils are new

Anyone know what's wrong with M unit. it's got the hi beam led out put light on all the time when I turn the ignition on .with notting connected to it only the ingnition switch .

Quick question can I use a smaller size cable for powering the m unit ??as I'm running wire through frame.

Hi I'm in process of wiring my m switches and m button .My question is when wiring m switches there's a terminal for earth to body of switch .then earth to each button should I run a earth directly to this.or will it be ok like instructions say .second question the m button as one wire for...

Hi I've bought a head light with side light that goes around the lamp .my question is can you have this working with the m unit .I have green =earth white =low beam blue =main beam brown =side light .

Hi does anyone no if the sh775 reg /rec will work on the Cb750sohc thanks . Or recommend a good one for this same bike

Hi does anyone no what's the smallest battery I can use on my gs550 scrambler build I need the battery to be as small as possible size wise . Thanks

Hi I'm trying to make wiring diagram for gs 550 ex with m unit . Just got to R/R wiring I have a black and white = earth red = power yellow to stator white& blue =stator which just leaves red& white does anyone know were this goes thanks

Hi does anyone have a wiring diagram for gs550 e using the m unit . Not too sure how to wire the CDI up . Cheers yozzer

Hi this will be my second project .my first is almost complete now .so been looking round for a new project .this came up in my area .so thought I would give it ago .looks a bit strange at minute but I'm hoping to make a brat / scrambler out of her .

Hi I'm thinking of buying these coils does anyone no if they will work with a points ignition on a cb750 f2 1978 .

Well my problems carry on now having bother getting my starter motor to work when I press the starter button the solenoid just clicks any ideas .I've got a good earth from engine mount To battery .solenoid wired one wire to starter button other wire to earth .then thick cable to battery other...

Hi so I wired my blinkers up which are led .fitted new led relay .the blinkers come on but don't flash .?? Any ideas anyone .Cheers I'm thinking it could be a duff relay .it's a 2 pin relay I fed one wire from the switch to it then a power wire to the other side the the other two wires from the...

Hi I'm wanting to fit blinkers in my harness could someone tell me how it's done there led indicators I have led relay 2 terminal on it and this is my Handel bar control diagram

How many ground point should I have on bike cb750 f2

Started wiring bike to day quick question I've got power 30amps wire to ignition from fuse box then black wire from ignition back to fuse box does this wire have to be 30 amps also or can it be 16 amps

Hi I'm coming to the part of my build were I've got to start thinking about making a wiring harness .the thought of it fills me with dread .does anyone have a simplified diagram .I'm wanting to keep starter and run front and rear break switches .+ indicators .probably oil light .Cheers yozzer