Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I'm not seeing any arrows on the spark advancer. Trying to set electronic ignition timing and when turning crank clockwise the timing is way off (test light comes on way too early, but shuts off near F mark). Only reason I ask is because I'm watching a video on a cb750 and theirs is clockwise...
My start clutch in my cb350f grenaded itself and found the springs and spring caps during my oil change. I've split my case and the rollers are still in the starter clutch thankfully.
Although, I have no clue what the piece was that wedged itself onto my crankshaft. It's not just one piece, I...
So the current 3 way pressure switch is getting in the way and need to find something smaller.
I found this: http://www.motorcycle-superstore.com/3/13/123/26781/ITEM/Goodridge-Banjo-Bolt-with-Built-In-Brake-Light-Pressure-Switch.aspx
Has anyone had experience with one of these and will it...
I don't know if it's to anything significant and the penny is obviously for size comparison.
The motor only has 2,745 miles, although it looks like the previous owner had dropped it. The steering has a slight tweak in the steering.
Not sure if that drop had caused something to come loose/break.
Welp, my lower tree has a slight twist on the right...
...which resulted it into looking like this with forks on.
Just looking for the lower tree for a CB350F.
We had a stage collapse last night which was caused from a storm with high winds. Very tragic to hear and my heart goes out to the victims and families.
Here is the article:
The death toll has risen to five in the stage collapse at the Indiana State Fair in which 45 people were also injured...
Since my bike has been in my room...
..Sleep has never been better. I just love the smell of my old garage in my room.
I'd suggest it, but then I wouldn't... unless you have a big room.
I'm just curious but has anyone tried textured paints on their tanks and seats? I don't know if there are any disadvantages to using it.
When I was shopping for my paint I came across a hammered look.
I just found this on google but its a pipe with the texture paint im talking about.
I...
Hey guys, the names Ryan. I figured since im in the middle of working on my bike, i might as well post up some pics! :P
I bought my CB350F summer/fall of 2010 for $400. It did not run and it was unfinished but it did have good compression so that must have convinced me enough to buy it. As...
I've shopped around trying to look for small enough filters for the 350 four and hadn't any luck. If you know any site that may have any, let me know. I prefer non K&N due to cost but send me links anyways of any brand that will fit. I'd also prefer singles if you find any. Appreciate the help.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.