Search results

Just got a message re transformation and forgot I said I would drop in after selling my ACE. Just a photo of this years Marshal transport, now for sale. All the best. Lance :cool:

I still have three bikes to play with, I've always had bikes, must be in the blood, even after my last off in 2008 (RTA) I bought a little tax exempt Spitfire to wean me off bikes, but you guessed it, I now have old bikes and cars. :) My philosophy is that if I have the misfortune of having an...

My Ace has a new owner. The young lady and her dad came and took it away last Sunday to Sunny Bognor Regis. It was the first time she had seen it apart from photos and from the grin/smile on her face I think it was exactly what she wanted. I mentioned the Do the Ton web site and you may get a...

I though the image looked familiar, naughty of the dealer using it in his advert though. ;) 8)

This is the best image I could manage of what looks like a rear disc on the 50cc 2015 bike, would one of these wheels be any better than the drum brake one. If the image is too small I can send a link to the dealer page on ebay. 8)

:) I took my Ace to the IOM to get to my marshaling post and sell it if I could, but I ran out of time beforehand and didn't get the fairing finished or fitted either. So I will be putting it up for sale shortly. Worked a treat on the Island and attracted plenty of interest. Some pics, one...

Crazy, Apart from the V-Raptor, no ideas about the hub. Why not count the number of std spokes, measure one (dia and length)and give details to rim supplier. 8) http://www.skyteammotorcycles.com/media/pg/54/1323355874/L.jpg Alternative downpipe as well.

I had an interesting talk with a bike shop guy regarding the Ace tuning. It went something like this. Keihin Deni cp26 carburetor “Changing the pilot and main jets is not the answer to improve performance, it’s the midrange that needs sorting and all it needs is an O-ring under the needle jet...

I've heard on the Gapevine that Skyteam will be offering a CR93 type full fairing and fittings for the Ace. Rumored to be via Snake Motors. 8)

Thanks for that. I've now wired it up and although it's a bit slow, it works and I'm happy. I used the wire that used to connect to the brake light switch on the lever perch (no lights at all on my project) for the ignition fed supply. 8) Lance

Hi All, Wiring in my rev’ counter and need help. Lighting not needed so it’s just the pulse wiring. The description for the wires from the unit also mentioned on the thread is as follows. . Black line lock positive.(B) Green line lock negative.(G) Black with yellow trace (says yellow in...

Hi Herbert, Wonderful job, saved my old head a lot of ache ;). One observation though, I assume the headstock mounting assembly now controls the degree of steering lock or have you reduced the amount of lock on the original lock stops? I might adopt your clamped idea but use a flat vertical...

If you have clip-ons try bleeding the brake with the steering fully turned to a position so that the banjo on the end of the m/cylinder is lower than the reservoir. Worked for me. I got trapped wind ??? 8)

Mine had splintered the same when I checked it recently. I found I had one of these unused kits, must have had it a while because the price tag says £9.80. Anyway the contents include the small brass nipple from the engine end that is soldered to the new inner cable which was all I replaced...

I went here...... http://www.skyteam.cn/pro-third.asp?id=429&DefaultPicUrl=UploadFiles/2011108277861.gif sent em a message and after some question was sent a file to download from.. Maggie_Skyteam maggie@skyteam.cn Bostin 8)

Hi, If you aint already seen this, have a look now. http://www.petitionbuzz.com/petitions/sirjohnsurtees Pass it on. 8)