Search results

  1. cleoncleon

    HONDA SL350 / CB350 TANK .. Clean Inside w/ Latch

    Hello dudes.. Gota tank here.. 350, not sure exactly which though lol .. You decide if youre into it. I ended up not using this tank for anything, so.. . Im sure one of you guys can make some use of it. Tank has a few dents, ou can see the main ones from the images.. Insides look quite...
  2. cleoncleon

    XS650 Parts Sale! Hardtail Frame, Engine Partout, Carbs, Bits.

    Alrigth fellas.. Aquired a bunch of parts from a 650 project I picked up. Using what I need for a tracky/braty build, so, everything else goes... Shipping is Included in the price. So, what you see, is what you're paying. I might have multiples of parts, so, if you still see it up, its...
  3. cleoncleon

    Looking for 35mm Clipons

    Sup dudes. Looking for a cheap pair of 35mm clip-ons, shipped to Hell, Arizona. 85308 Thanks
  4. cleoncleon

    Yamaha XS650 Parts - Head/Pipes/Misc + Honda CB360/XL250 Things...

    Hello all, got a bunch of stuff here I want to let go of. Need to make space/funds for the current Yama650 build. - Price and Description will be right ABOVE each photo/set of photos. - Shipping is not included but I do try and ship as cheap as possible. - PayPal or Cash; I also accept...
  5. cleoncleon

    XS650 Transmission, is this action normal?? VIDEO INSIDE!

    Alrgiht fellas, I've been looking around for a complete bottom case because I don't feel like dealing with this one... but, fugg it, i'll try while i wait for a nice complete motor/bottom.. What's happening is its hard to find the gears, when i rotate the spindle and twist the star where the...
  6. cleoncleon

    Honda CB/CL/CJ360 Parts - Clearing Out and Makin Space...

    WHAT IM LOOKIN' FOR: A Yamaha XS650 engine, quiet simply. ;D WHAT IM SELLING: Got some parts for sale here, have a gander. Shipping is included in price 1. 76' CJ360 2 into 1 Header Set, it'll fit both the other Models, I had it on my CL during the build up, but came across an Old Yoshi 2 -...
  7. cleoncleon

    Well, Cam Chain is broken...

    Long story short, I got to try out some new jets today, a 150: Main and 25:Pilot on my CL360, working realll nice, but. As i pull into my garage I hear this rattle, so i stop reving at let it idle... Then a few moments later i hear a huge PING and hte motor shuts off... Turns out one bolt on the...
  8. cleoncleon

    Tappet Noise? or Cam Chain Noise? Video inside...

    Alright fellas, so this is where I'm at... No photo of the seat yet, but you can get some glances of it in there... All aluminum. Problem is, that clicking noise. I'm assuming they are my tappets? I've tried adjusting them a million and four times and I cant seem to get the noise to go...
  9. cleoncleon

    Time for Timing, having a hell of a time too...

    Well, the build ran today, on one cylinder. so amped! 8) BUT! I have a few small problems... 1. When I was timing, i believe i was doing it correct... but, the Left Point (Yellow cabled one.) seems to keep it's light on when I turn the engine over. No matter how many times i kick, the light...
  10. cleoncleon

    1972 Honda Trail 70 or 1970 Honda C70

    So there are basically two of these on my local craigs. Both turn over, but dont run, and don't have a title, just bills of sale. Both sellers have posted them up for $200.00, I'm looking to talk them down. Am I right in thinking that? I feel like $200 is too much... And also, Which would you...
  11. cleoncleon

    CB360 Speedo for Tachometer

    Got two CB360 speedos, one looks good, the other seems to function good but the chrome ring that holds together the faces, dosnt hold them well. I have the ring. But i'm looking for a Tachometer for a CB360
  12. cleoncleon

    CL360 Alternator Wiring Help.

    Okay guys, I need help connecting my charging system, having a hard time with it. My alternator has 4 1/2 wires: 1 - Yellow 1 - Yellow (Might be White... its dirty) 1 - Pink 1 - Green/Red 1/2 - Green/Red - also, i poked that into the neutral switch. Whats the need for the one above? My...
  13. cleoncleon

    360 Exhaust

    Looking for some Headers for my 360. 2 - 2 or 2 - 1. I've already gone through TWO failed transactions here on DTT, just because of headers. USPS's lack of consistency for the first and a 'missing' down pipe on the other ( I suspect USPS again...) . Third times the charm? If I can only find a...
  14. cleoncleon

    CB360 2 in 1 Collector Down Pipes.

    Alright fellas, I have these: But, Im missing the Right Down pipe, ( Left in Photo ). If anyone could send me that and a Flange I would be grateful! A set of down pipes could be cool too! That collector, is up for trade as well if I can find a decent set of 2 - 1 downpipes. Thanks Dudes.
  15. cleoncleon

    CL360 Tapered Bearing Install Question

    Hello all! Got the Pyramid-Parts kit and I'm trying to put my stem/trples back together. I've been reading around and it seems there is a height issue with the lower bearing, at times where a spacer was needed. I don't have the original bearings and such, so I cant really make and measurements...
  16. cleoncleon

    CB/CL360 Parts Needed.

    Hey fellas, looking for a few things here. - Kickstand Spring - Shift Lever - Brake Lever and Misc. bits - Gas Cap for 360 Tank.
  17. cleoncleon

    I've Put This Off, Long Enough...

    I'm yet to figure out this wiring situation. After looking at a few diagrams, I'm still a little confused, so, Here goes.. Here are my Harness & Parts. Beside's the Battery and Condenser, This should be enough for what I want, right? It looks like it should be a matter of plugging things...
  18. cleoncleon

    CL/CB360 Knock-off Carburetor Question..

    Has anyone ever played with these? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220787188297&viewitem=&sspagename=STRK%3AMEWAX%3AIT#ht_1043wt_799 They look like Keihin Knock's, though these aren't the Flatslide replica's that Oko makes.. At $32 bucks a pop, minus that...
  19. cleoncleon

    CL360 Upper Damper (Slipper Tensioner) - Needed?

    I'm putting my tensioner back together and I don't seem to have the Upper Damper A. The tensioner arm has the Lower Damper B, I see the little flange towards the back of it.. Do I NEED the upper damper? and. Does anyone have a picture of the actual thing? In the case that I do need it, I...
  20. cleoncleon

    Mikuni BST36SS 36mm Carburators

    Got a rack of BST36SS's here that sure as hell won't fit on a CL360.. So they need to go. They're in good condition, slides are good, just needs a normal cleaning. As far as what's here, comes with the basic mounting bracket and fasteners. Don't have misc. bolts. Jet's should be OEM.. Best...
Back
Top Bottom