Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
So, I am not dead. I haven't forgot about this project. I just got side tracked for a while. Working on getting this thing finished up so my wife can learn to ride on it this spring. I ordered some more parts, a seat from Texavina, and we are getting close. I'm working on putting the rear brake...
got my battery/electronics tray mostly fabbed up. My welds aren't the greatest as it's been about 5 years since I last did any welding, but I'm getting the hang of it again pretty quick.
I need to figure something out for a rear fender. I would like one that goes all the way down to...
Well I'll be damned. Good eye. Apparently I'm an idiot and I will hang this bracket on the shop wall as a reminder.
Thanks lol. Everyone move along. Nothing to see here.
That was my first thought too, but there is only one of them. And I'm pretty sure all the exhaust stuff is sitting in a tote because I wont be using anything off of it.
Is there a battery hold down or anything like that on these CB's.
Making progress. Got the front fender cut down to where I want it and it will be going blasted and powdered this week. Started mock-up on a battery tray, but I need to go find a battery for this thing so I can make sure I get my dimensions where I want them and lastly the wiring harness is...
Update time. The engine is back in the bike! Thats progress. I went through the factory wiring harness and it is all there, and I couldn't find any spots where it had been chewed on by a mouse or anything, and it was never hacked or cut either. I'm in process of finishing cleaning it up as it...
I'll check tonight and see what tires they are. They were off brand of some sort because they were the only size I could find that fit the bill. I don't have a lot of progress as of right now. I'm a glutton for punishment, so I started up a small company this spring, in addition to my real job...
Thanks for the input ADV. I wasn't sure if just looking at the journals in the valve cover and the bearings would be indicative of the condition of the journals in the head. I probably won't putt it apart then. I think this motor has been pulled apart before. The acorn looking nuts in the head...
Update. We have roller and it looks like a motorcycle again. Almost. I broke into the top end of the engine because I figured I would inspect the cam journals before I put the motor back in the bike. The valve cover looks good, and the cam it's self looks pretty good. Is there a good write up...
So after about a 9 month hiatus this project is back on track. Wife and I bought a new house and did some remodeling to it, then hunting season came along, and basically I haven't had much time to work on it. The good news is that the new house has a 24x24 detached shop that is heated and...
Re: 75' KZ400: 2017 Updates!
Yea, $750 would be reasonable. I bought a '76 back in January that was in almost mint condition with the exception that the carbs needed cleaned and it needed airbox boots. I paid $750 for that, so I have a hard time spending $750 for something that needs a total...
Re: 75' KZ400: 2017 Updates!
Looks good man! The KZ400's are my favorite bikes. I don't know why. There's a set of two complete that look to be in good shape and all there on craigslist right now. Guy said neither has ran in at least 5 years, and only one has a title. He wants $1000. I tried...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.