Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I need a set of CB or CL 450 forks - K0 style external spring to cannibalize - the fork tubes can be bent, broken, rusty, the sleeves can be gouged, chopped, oxidized or even missing.
what I need are the internals - the guide pipe - part number 14 in the below diagram
I have a tank from a Yamaha MX175 that is missing the cap - really no problem as the original caps are available. but I would like something "prettier" as in not plastic, and suited more for a cafe racer look, so metal ideally.
is there another bike with the same tank thread that will allow me...
Hey guys!
back at it again - this time with an even smaller bike, with lots of potential
here's what I am starting with:
The bake came with no exhaust (anyone wanna sling me a standard CB350 exhaust for fitting?)
but it does have carbs, starter, and the sprocket cover
I have some ideas...
I'm talking about the rims sold at 4into1:
https://4into1.com/rising-sun-rim-spoke-set-black-honda-cb350-360-400f/
they seam pretty cheap, and I know that can be an indicator, but I also know this is just old tech, doesn't take a lot to make a rim. they are about 1/3 the cost of a Sun rim, and...
I bought a CB360 a couple years ago that needed some work
this is how it started when I got it, recently survived an electrical fire due to lithium battery without the properly upgraded charging system
I built a makeshift workbench and began the dissasembly - motor was in decent condition but...
Timing cb360 points, I cannot for the life of me get this right.
What happens is the test light stays in for half the stroke before LF mark, then turns right off after LT. Why are the points open for the entire time?
I know the XL hub won't work because of the offset - so I wanted to know if anyone can tell me if the rear rim will have the correct spoke angles for the CB360 hub
I am trying to find a good replacement suspension setup for my CB360 - almost every replacement setup uses springs that are like 3" and look really ugly and out of place on the bike.
these http://4into1.com/reproduction-chrome-shocks-eye-clevis-321mm-12-5-8-honda-cb360t-400f-500t-550/ seam to...
OK here we go. I bought this bike in February last year from the second owner, who in an attempt to rekindle his youth decided to "cafe" the bike and had a younger friend 'help' him do so. It was quite a mess, I don't know why he chose to chop up an otherwise perfectly good bike.
I never...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.