Search results

SOLD

Sale pending!

Cleaning out some stuff, we're expecting twins and the due date is getting closer. I've got a set of loaded gun rear sets, linkage and a shift arm, got it all a while back from DCC and never installed any of it. I'll include a photo, and all info can be found here: Rear sets ($129 new)...

Glad it worked out. My manual impact drivers (cheapie harbor freight and snap-on) only stripped the head further (as if the metal was just too soft), the only option I had was the bit and yeah, only took seconds. I was having luck with my impact drives until the one problem screw, since I got...

No heating necessary, I did spray PB Blaster on one and let it sit for a while though. The extractor bits really help with stripped heads, they aren't a bad investment when dealing with these old machines.

I was up against the same situation a while back and had run out of ideas, nothing worked. The impact drive only tore up the screw etc Go to Lowes, Home Depot, whatever is near you and look for what is called Grabit Extractor kit, they are drill bits designed just for this purpose. One end is...

If you like that look and want to protect your head? You best bet would be to not wear a helmet like that while riding. Not trying to be a jerk but those are not safe at all. If you do a search for "HCI 50" there will be results for a similar styled helmet to the davida (much cheaper though)...

True, George Jones was arrested for DUI while on a lawnmower. It happens around these parts.

Awesome job! Looks great! I bought one a couple years back but before I could go pick it up it was stolen. I still want one.

I don't see the benefit in subscribing. My wife got me a subscription, I usually just thumb through it when I'm in the garage having a smoke. There is no discount benefit over subscribing, nor do you get them faster if you subscribe (they send out their subscribers mags when they send them out...

I thought that looked like the 450 petcock, but I just checked a fiche site and did just a quick search and it called for the same part number for 350 and 450 petcock. Are the fuel lines run properly? I can't tell for sure but the lines look like they are run different on this photo. Don't...

I'm looking for a set of rear shocks that are eye to clevis, 12.5"/320mm from eye opening to clevis opening, for a 74 CL450. I need something stiffer than stock, I have bottomed out on the roads around here a couple times now. I don't have a lot to spend, am having to do some house work after...

p71sohc, he's also got some videos up on youtube under the same name

well... ...this sucks.

Pm sent

Actually, yeah, I just checked and the same brand, speed and strength, has a jacket called "true romance mesh" is marked down to below $70. Don't know if it's her style or not but it is mesh and armored like the other.

I've been searching for one since it's warming up quick here in Texas, just thought I would share this deal I found in case anyone else out there is looking... bikebandit is currently selling the 'speed and strength' "moment of truth sp" mesh jacket for $75 bucks, pretty good deal on a decent...

So then you are deciding between $450 for a running 350 with title, $500 for a running 350 with a title and extra motor or $300 for a 450 with no title and not running? Yeah, no doubt, go for the 350 and pay the extra $50 for a parts motor. Just looked up a '73 450 and '73 350, there's a...

I would go for the one with a title (and it's running on top of that). I think the fact that it's running AND has a title is worth the extra $150. Heck if I find a deal like that around me I would buy it in a heartbeat. A not running bike could have anything wrong with it. Sometimes it may...

I'm in Nacogdoches, anyone out there near here? Doesn't matter what you ride, just thought it would be cool if there were anyone out there close by. I don't see many custom bikes around except for harleys. Although, one of Carpy's creations is in town (the 750 cyclone), other than that...