Search results

It lives!! Spent the afternoon swapping everything over from the old bike, including the unobtanium GS125 forks which are thankfully not bent. The new AGM battery for it even came 3 days early so I didnt have to bump start it for my test ride! Rides like a dream. Just waiting on my repop tank...

To anyone interested, I FOUND ONE! And not just any old replacement frame. A complete bike with just a hair over 800 miles! It even came with a ton of paperwork from the single owner. In the process of swapping all my parts over now. Spent the cold days tearing the old bike down to the frame in...

Also a little update for you guys; I got the seat back and shook the bike down on a few longer rides. The seat is very comfortable compared to my rubber-mat-with-towel-under-it test seat. lol. Its not perfect and needs a bit of adjustment, but I like the color on it. During my ride I noticed...

Good thought, but Im just going to put an older, simpler Yamaha speedo on it and possibly a simple digital tach when I switch to the 600.

I did not, but it never gave me any reason to believe compression was an issue. No smoke or strange behavior. Its on the agenda, but even if its a bit low itll have to do for now. Im not tearing down this engine. Lol. Hopefully Ill have a 600 built for it by next year. As far as the exhaust...

All thats left is waiting on the seat! I have my friend trying her hand at recovering it with some old Maserati interior pieces I had lying around. If that doesnt pan out, I plan on hunting down a Giuliari seat from Europe. Once the seat is back on, I can get back to riding it once it warms...

Anyway, I touched up the engine covers and gave it a coat of paint. I also painted the tops of the carbs while I had them apart for cleaning and the new fuel T. For some reason only the outside two are chromed. I decided on crinkle paint for the valve cover. I would definitely recommend...

Bought the bike a year and a half ago for dirt cheap. Guy was moving to California the next day, so I talked him down from $1200 to $400. All it ended up needing was a battery and the carbs cleaned out/new pilot jets. I ended up putting new grips/handlebars, headlight brackets, a non-vacuum...

Well, Ill be damned. Even found a NOS set for a little over $200. Thanks for the tip.

Im currently freshening up my XJ550 Seca for the spring. Repairing broken exhaust studs, fixing a fuel leak in the carbs, sorting out some wiring, and just generally cleaning it up. Im leaning more and more into the "street fighter" look, but right now Im trying to source some period correct JDM...

Gotcha. Ill see what I can manage. The Rickman Zundapp I have eye on is literally just the frame, tank, rear wheel, swingarm, and forks. All of it is super crusty and rough. Itll be tough and EXPENSIVE sourcing parts in this part of the US. As much as I would like to. Lol

Im just trying to figure out the logistics of that. Lol. Never tried this before. Would it be easier to tear it down to bare frame? I shot them a message, so well see. They have a suspicious amount of GN125 parts, so chances are they were all from a parts bike at one point. Parts bikes usually...

Right. Thats obviously the easy route if and when I find a parts bike/frame. Im currently on the hunt. But like you say, its worth at least trying to iron out the frame. Getting a good look at it, it all seems doable with enough leverage and patience. The tail end of the frame doesnt seem...

Thanks, I appreciate it. Im just now starting to walk again. Lol. So I might as well get right back on a bike. Its a shame these are so difficult to find in the US.

Thats a bit pricey for me, but its good to know theres professional options out there. I was thinking Id either eyeball it back into shape myself with a little wrestling or buy a cheap parts bike for $1-200 if I can find one. Theres a large motorcycle junkyard of sorts near where Im at that Ive...

So, about a month ago I bounced off the front of a van on the ol Suzuki. Snapping my leg in half and bending just about everything that can be bent on the bike. Mostly small, cosmetic issues. But a few things are a BIG problem. The frame is bent near the forks and the swing arm is goobered...

Looking good for just having it a little while! Keep it up and welcome to the club! I have a GN125 myself and Ive been turning it into a bit of a scrambler. If you ever want to take a bit of the rake out, you can run longer shocks in the rear and Euro GS125 forks up front. Theyre like 2 inches...

Thanks. Yeah, I plan on swapping an early FZR/Radian 600 onto it and beefing it up a bit. Modern forks and suspension. Maybe do a small 2-headlight fairing and make it a sort of proto-FZR. Paint it the 81 factory pearl color and rewrap the seat with some 60s Maserati interior scraps I have in...

Ive been building and riding bikes for a few years now and figured Id venture out onto the world of the internet rather than keep doing my own thing in somewhat isolation. Maybe get some new ideas. Out of the dozen or so bikes Ive cycled through my garage, I currently only have 3. My first...