Search results

  1. ronnie

    400four, Dueling Banjos

    I believe I have a set from a 350f but I cant check them for another two weeks as I'm at work right now.
  2. ronnie

    "Dago" Resurrecting a 350F gently

    Got some goodies in today that I will try to get on tomorrow. The battery box will help me figure out my rear fender and the other bits in the rear. Welded on the seat hoop yesterday and still need to smooth out the welds a little. Brought some pieces to the machinist to get made like a new...
  3. ronnie

    "Dago" Resurrecting a 350F gently

    Got the rear set brackets welded up. The peg position is about an inch or so below the swing arm mount 8” aft of the stock pegs. Trying to figure out what to do with all the space on the brackets. I may try to drill some design in them but we’ll see. I ordered our exhaust from 4to1 today. I...
  4. ronnie

    "Dago" Resurrecting a 350F gently

    Well the chain works without the shock in the way.
  5. ronnie

    "Dago" Resurrecting a 350F gently

    Yea that seems to be the issue unfortunately. I may have to get different shocks because the spring is too low. So I can’t flip the sprocket because it has the grove on the back for the hub studs. I forgot about that. Then i swapped to the old sprocket but it’s for 530 chain not 520. Forgot...
  6. ronnie

    "Dago" Resurrecting a 350F gently

    Well it’s tough to say right now. The rear wheel is hanging free and there’s no swing arm bushings in so there’s play everywhere. It appears to be in line so I’ll run the chain and see first before I flip the sprocket. The sprocket shoulder is really only an 1/8” so it’s not big.
  7. ronnie

    "Dago" Resurrecting a 350F gently

    So I mounted the rear wheel and I’m having a chain/sprocket to shock clearance issue. I have the 520 sprocket kit that is the 17t front and the larger 40t rear sprockets. When I put the end of the chain on the sprocket it is hitting the yss shock. I noticed the sprocket has a shoulder on the...
  8. ronnie

    "Dago" Resurrecting a 350F gently

    So I did some work on the bike today. Put the clip ons on the forks and mounted the break and clutch levers and the two switches. Threw the yss rear shocks on to hold the swing arm in place. From there I mounted the engine into the frame which was a total PItA. Reason was is because I’m using a...
  9. ronnie

    "Dago" Resurrecting a 350F gently

    Yea, it’s definitely cool to see everything I had planned for it when I boxed it up! Sent from my iPhone using Tapatalk
  10. ronnie

    "Dago" Resurrecting a 350F gently

    Hello again everyone! Well due to the virus our sailboat is in in the Bahamas and we can’t fly back to her. That said I’ve got some time to try to get the project back on the table to hopefully get it put together. I’m having a hard time remembering exactly where I left off and unpacking totes...
  11. ronnie

    Traveling Europe in a Ural

    Hey friends, Not sure if you have seen this or not, but this couple sold their sailboat to travel Europe in a Ural with a sidecar. I followed them during their sailing adventures and since this steps into my other realm of life, I wanted to share with you folks. Check them out...
  12. ronnie

    Liquidation Sale!!!

    Stuff is still up for sale! See more @ redemptiverepair.com
  13. ronnie

    WTB CB400F Supersport Rider Pegs, brake pedal, and shifter linkage

    Do they have to be 400f pegs? I think have pegs for a 350f if that would work for you... See more @ redemptiverepair.com
  14. ronnie

    Liquidation Sale!!!

    I do not, unfortunately.. I was missing when I received all this stuff. See more @ redemptiverepair.com
  15. ronnie

    Liquidation Sale!!!

    [emoji22] [emoji43] [emoji88] You got it! See more @ redemptiverepair.com
  16. ronnie

    Liquidation Sale!!!

    Sounds good Chris, I have to admit I sold the little red 350f last year.. It just wasn't getting ridden with me working on the boat. All items still for sale friends! Make me offers, I'm feeling generous! See more @ redemptiverepair.com
  17. ronnie

    Liquidation Sale!!!

    I see someone hasn't become a statistic yet! Hello to you too Chris!
  18. ronnie

    Liquidation Sale!!!

    Shoei Qwest helmet w/ clear and mirror lens - Large - $250 Vulcan VNE-98431 Armored Jacket with Thermomix Insulation - Medium - $150 Both of these items were only used maybe a dozen or so times, helmet was never dropped and both were taken well care of. Both bought in September 2011.
  19. ronnie

    Liquidation Sale!!!

    Hey friends, I'm getting rid of some moto gear that I have had for a while and won't be using. I would hate for this stuff to rot or get tossed so I am getting rid of it all. I'm not looking to get rich off this stuff so if you have a offer, let me have it and maybe we can work it out. All...
  20. ronnie

    "Dago" Resurrecting a 350F gently

    Re: "Dago" Resurrecting a 350F gently Nope, she's in storage until I get to the next part of my life on terra firma. My fiancee and I are moving on the boat and sailing around until we decide to stop. I fully intend to finish her when we get a house and garage. I had to clean up my...
Back
Top Bottom