Search results

  1. P

    Yamaha SR250 Regulator/Rectifier for Lithium Battery

    For future reference, Sparck Moto was able to help me out.
  2. P

    Yamaha SR250 Regulator/Rectifier for Lithium Battery

    Just purchased an Antigravity 8 cell battery. Does anyone use the stock R/R with a lithium battery? If I was going to upgrade, which one is a good one to get? Thanks!
  3. P

    1980 Yamaha SR250 Swing Arm Tight

    Thanks!
  4. P

    1980 Yamaha SR250 Swing Arm Tight

    Well, I added a second shim and it got tighter. These are not new bushings and I'm starting to think they may be worn. They don't seem to extend out enough on either side of the right side. I really don't know. Please see attached pictures. I am putting the shims into the right outside cap. That...
  5. P

    1980 Yamaha SR250 Swing Arm Tight

    Perfect! I added one shim and didn't seem to make a difference. Didn't consider multiple shims. Much appreciated!
  6. P

    1980 Yamaha SR250 Swing Arm Tight

    Swing arm is very stiff if torqued to 47lbs which I believe is the spec. Took it off, greased it. Bushings looked good so I put it back in. Still very stiff. To my knowledge, swing arm should fall on its own weight. Anybody run into this and solve the issue? Thanks!
  7. P

    WTB Yamaha SR250 Tank

    I'm open to other tanks.
  8. P

    Removing Speedometer Cable from SR250 Front Hub

    Removed the retaining clip and the cable still will not pull out of the hub. It moves out a little and stops. Is there a trick to this? Thanks!
  9. P

    WTB Yamaha SR250 Tank

    Looking for decent, non-leaking tank. Thanks
  10. P

    Scrambler Seat for 1980 Yamaha SR250

    Thanks Last time I looked they were out of stock. Looks like they are back. Worth considering. Much appreciated.
  11. P

    Scrambler Seat for 1980 Yamaha SR250

    Leveled out the stock tank and looking to make a seat. Any recommendations on an aftermarket seat pan or seats that you like? Thanks!
  12. P

    Jadus Parts Source

    Actually they worked it out. They had a computer issue that kept asking me for an ID number. They corrected it, I placed an order and it came pretty quick. Thanks
  13. P

    Jadus Parts Source

    Is there a domestic US source for Jadus parts? Has anyone from the US ordered from the company in Spain? I had no success with that. Thanks
Back
Top Bottom