Search results

hey guys, anyone got a working jetting on Mikuni VM 30 or 32 for one of these machines? My info is CM400 CM450 CB400N CB400T all got the same setup and will work best with VM30, but VM32 is an option too. Thanks for help!

This my 1979 Kawasaki Z400 K4 i started building last year. I bought it from a friend in pieces. He had built it as a CafeRacer: After a lot of work this my interpretation, I finished it 2 weeks ago. It has nothing to do with the original. Only frame and triple is from the original. Did so...

Hey guys, can anybody tell me how to wire it? Thanks!

Got some trouble with my VM32 carbs on my '68 CB450K. It throttles really slow and doesn't runs over 5.000 rpm, than there is only stuttering. Setup is: MJ = #185 JN = #6DH7 NJ = P-5 PJ = #35 AJ = #2.0 Clip on leanest position. Carbs are clean and synced. Run Pamco ignition. Who can help?

Hey there, i just mounted Tarozzis on my CB350K2. My problem is on the brake-side. The original brake pedal has adjustment screw to get the right high/position for the foot. The Tarozzis don't have this option - no stop screw. I need to put the pedal a lot down, til the brake works (brake pads...

Which size may fit? Is there someone, who has the jetting for me :)

Hi there, someone got the jetting for BMW R100 2V, stage 2 tuning, open pipes and airbox, ca. 90HP? Or whats a kind of ground setup for this. Any ideas? Thanks Jan

is it possible to swap between the exhaust pipes of the CL450K to a CB360G?

Hello there, bought the Mikuni VM32 carbs with the jetting for CB 450 K from DCC. Now I overhauled my engine, but it doesn't run well. When I turn off the choke, it idles very high to 4.000-5000 rpm. With choke on 2.000 rpm. Played a bit with the idle screw, but that didn't help. The spark is...

Hello there, I'm searching for a good fitting Mikuni VM (32?34?) for the W650 with the fitting jetting. Can anybody help? Cheerio

hello everybody, does anybody know how to rejet the carbs when i want to ride open air filter like K&N? Thanks in advance, Jan

Nearly every part is customized on my 1981 XS 650. Took 1,5 years to build - by hand! Video: https://vimeo.com/45061546

My project is nearly at it's end, so I just want to show off. It's not finished yet, still got some stuff to do. Base is a 1977 Honda CB 360 G. 100% build by hand! And there's a little video too: http://www.youtube.com/watch?v=WoPxK-g0pLg&feature=youtu.be Enjoy! Best regards from...