Search results

This is the top of turn one at the Circuit of the Americas track they are building in Austin TX. I toured it today and man was it mind-blowing. I can't count the goosebumps!!

Cant quite figure out how this spring and adjusment screw at the brake pedal all jive?? Any help would be appreciated. also this is a 75 cb360 and mounting a cl360 pedal........thanks for the help gents. ;)

Ok so heres the scenario........... 1975 cb360 and I have a reg/rec unit off of a 2011 zx6r. The modern unit has six total connectors 3grey and 3black. any help with how to wire this thing in would be awesome. thanks all

can I just put the cj360 drum front wheel on my stock cb360 front forks? I'm having caliper master cylinder issues, and like the look of the drum. I tried to search but couldnt find anything...thanks

Ok after searching I cant seem to find any info on how to do this mod? I really like the look of external springs on front forks. Since im putting progressive rear shocks on my build I could use the springs off my stock rears, which I think is the standard when doing this mod. :-\ So my...

<iframe src="http://player.vimeo.com/video/19061363?title=0&amp;byline=0&amp;portrait=0" width="400" height="225" frameborder="0" webkitAllowFullScreen mozallowfullscreen allowFullScreen></iframe><p><a href="http://vimeo.com/19061363">MUSIC VIDEO RIDING SEPTEMBER</a> from <a...

kinda funny!

Has anyone tried to fit 350 pipes on theyre 360.....Its a long shot but worth knowing in my case! Thanks guys

http://austin.craigslist.org/mcy/2733095817.html

So I've pretty well familiarized myself with the forum I think, and have already introduced myself. So I gues now is the point where I start my build thread. I hope yall enjoy! The bike was a throw away that I got for free about a year ago from a customer at my parts counter.( I was a parts...

I'm sure there is a thread somwhere that we can post cool bikes we've *spotted*, but I couldnt find it ??? This old girl is a 1979 cb400 with a whiskey bottle fuel gauge and what looks to be an all custom frame. pretty neat! ;D

So this is a 2006 drz125 punched out to a high compression 150cc. Bigger Carb w/k&n pod filter. Excel 17's laced to stock hubs w/ almost new Michelin rains. Yz85 front end and rebuilt rear shock w/ heavy duty springs. pro circuit t-4 full system, asv levers, Braided brake line. Clean TX title...

Really need to find a set of these for my build I have a set of stock cb pipes if anyone might want to swap or I would gladly buy outright. Thanks for any help. Levi Sent from my SAMSUNG-SGH-I997 using Tapatalk

OK so my frame swingarm and centerstand have all been blasted. NO bad rust spots! ;) and I have already sprayed my swingarm and centerstand with rust-oleum engine enamel, and I like the way they turned out, BUT I don't know if I trust it on the frame. I didnt primer under either of them and I...

So this is a cb 360 ported polished and freshly buttoned up....The jug, combustion sufaces and all head parts have been ceramic-coated. I just recieved my vm 30's and the corresponding boots. I noticed that the intake work we did is a much smaller bore than the boot size. Should I widen it...

alright so this is a test run....I recently traded in my AMAZING 2009 zx6r for an also amazing sporty 48....but I have never in my life thought that I would be an owner of a harley. SO I've had this cb 360 in my garage , not getting worked on for way too long, and now its time to get serious! I...