Search results

I am having trouble figure out what my problem is with my CB750 project. When I try to turn the power on it all of the electronics flicker and won't stay on. I have narrowed the problem down to the field coil, but I'm still confused. When I test the field coil my meter is showing 7.4 ohms. That...

Where can I find a valve shim kit for this '80 CB750 I am working on? I am having trouble finding a shim kit with a large enough OD.

Anybody know what the law says about license plate placement on motorcycles in Texas? I figured I'd check before I take the time to make a mount for my CB750. Would I be able to get away with having the plate about like this? The rear of the frame is going to be bent up a bit further than it is...

I have an '83 Magna that I am trying to get back on the road that is giving me nothing but frustration. I was having issues with the clutch slipping. After going though the system it was pretty clear that the slave cylinder was sticking, so I got a new one. I tried throwing everything back...

So I'm terrible with keeping up with things on here, but I'm decided I'll start a build thread for my CB750 even though I'm actually almost done with it. I've taken pictures the whole time, but just never got around to starting a build thread. Before anyone says it, I know it looks somewhat...

I'm looking at getting a GPS speedo for my '78 CB750 project and was looking at either the speedo/tach combo from Legendary or just the speedo it self form them. I know all I have to do for the speedo is hook up the power. I am assuming that I would need to get some kind of converter to go form...

I'm about to build a new oil tank for my 78 CB750 that I just finished swapping a 1990 NT650 rear end onto. I'm planning to put the new tank in front of the mono shock between the frame. Sort of like this cardboard... I'm trying to figure out the dimensions before I go buy some metal. What is...

What is a good way to make a mount for the new monoshock on my SOHC CB750? I have already made the new pipes that will hold the mount. I just need to make, or buy, the clevis that goes down to the shock. How thick should the metal be on each side of the shock? Would it be better to make my own...

Anything special I should keep in mind while I make the frame mount for the rear suspension?

I have a 78CB750k that I have been rebuilding and have replaced the front end with a GSXR1000 front end that looks awesome! Now I want to bring the rear suspension/style up to speed as well. I'd like to convert to a monoshock, but would like to try and switch to something like the rear...

Anyone know what this sound might be? The bike is a '78 CB750k. I just replaced the cranks case and this was the 3rd or 4th time I have started the engine since. I haven't been able to figure out what the sound is, but it sounds like it is coming from the top end. I have triple check all the...

I have a CB750 that I have started rebuilding since I wrecked it last year. The only things on the engine that were damaged was the fins on the cylinder head and the points assembly was torn off along with part of the crankcase. This will be my first engine rebuild. Other then cleaning...

I have a set of CB350 air boxes and plastic covers. One of the cover still has the 350 Honda symbol. It looks like the PO coated the covers with plasti dip. Not sure how the paint is under the plasti dip, but there are no cracks from what I can tell. $40 bucks for the whole package.

I am starting to get really frustrated with a leak near the right side of the cam shaft on my '72 CB350. At first I thought it was the gasket between the side cover and the cam case (number 4 below), but I have replaced that gasket and the leak continued. After that I thought it was leaking from...

This may be a dumb question, but I wanna check before I buy. I'm looking for a new (to me) coil for my 72 CB350 and I wanted to check to see if it matters if I use a used left or right coil from another bike on my left cylinder.

I have new VM30 carbs on my CB350 twin with emgo shorty mufflers and emgo pod filters. I am have a really hard time getting these carbs tuned correctly. I have the time on the engine set right, the valves are to spec, new jets in the carbs (because I got them from sudco), and the carbs are...

Where can I find a 6.25 inch headlight?! I accidentally broke the glass lens on mine and need a new one

I have been searching for this and haven't really found the answers I am looking for. I am starting to do all of the research for my next project and some of it is somewhat out in left field. The project is my 78 CB750 that I totaled back in October and luckily had bad luck selling. One thing I...

Anyone know what's going on? My bike seems to idle fine and I can rev it and all, but then when I move, just walking while I'm in neutral it dies Sent from my iPhone using Tapatalk 2

Alright, before I start, I realize this is probably a stupid question, but I want to ask just to be sure. I have a 78 CB750K that I wrecked and need new engine covers and such for. The covers and that kind of thing from a 78 CB750F will fit the rest of my engine parts from my 750k motor, correct?