Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
So I have a bone stock 72 350f with a 400f header and shot reverse cone emgo just cleaned everything up and got it running starts and runs great other than a little midrange stumble from 4-5k. Carbs have stock jetting currently but this is midrange problem so I'm thing of moving the needels...
tore into my 72 450 today to inspect the cams...
they have some very light wear no real scoreing but all the timing chain and sprockets look good
so i went ahead and pulled the head off because one side had 180 psi compression (cyl full of oil)
the other i was not able to read.
The threads on...
so i have seen a few kz twins with single carb set ups it there a reason the single carb works better on the kz400/440s?
had anyone made it work on the Honda or Yamaha twins?
i know the frame would be on the way on some bike like cb350s but you could work around that
it was a craigslist find its had a ruff life but clean title im stoked
what do i need to know abouth the 450s i here there is a issue with the cam bearing wear?
i would posr pics but it aint much to look at unless you like tall bars and a bitchin sissy-bar
plans: full out cafe long term project
i have herd that a commin rich condition is due to fuel that is sucked buy the orings that seal the jets any one silde have this problem?or here of it?
so we out them on a stock cb350 and when you turn one side on all 4 come on, we checked the switch to make sure it was working proplery no problen there,made sure all the wires war hooked up corect so where do we go next?
check grounds? is it too little of a load and backfeeding thur a ground...
$150 cleaned the carb and rode it around all after noon
need to find a new tank or get more jb weld. felt like a kid again
will be fun pit crusier at the mx track might have to look into a lifan 125 motor
my org cl350 mounts are bent and dented i have strightend (hammered) the best i can and used way to much puddy to make them look some what useable....
i want to do somthing creative and not use the universal ebay mounts
any ideas?
i have a few differnt sizes of exhaust pipe laying around i...
http://cgi.ebay.com/ebaymotors/1970-Honda-CL-450-Vintage-Cafe-Racer_W0QQitemZ220382575578QQcmdZViewItemQQptZUS_motorcycles?hash=item220382575578&_trksid=p4506.c0.m245&_trkparms=72%3A317%7C65%3A12%7C39%3A1%7C240%3A1318
hell with that cheak this out...
i was thinking about this one ever heard of the brand zamp?
http://cgi.ebay.com/ebaymotors/Zamp-FJ-2-Matte-White-DOT-Helmet-Medium_W0QQitemZ110354105673QQihZ001QQcategoryZ6749QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
looking for a frame and title or tag and title for cb500/550
i have things to trade...2 cb350 parts bikes....
pair of org cb450 mulffers one has a small hole
other stuff...wheta ya need?
Jason Tiedeken (works for Roland Sands) is building this watch for updates here
www.hellforleathermagazine.com
serch: lockheed lounge
i have always wanted to turbo a 350
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.