Search results

Anyone know the diameter and thread pitch of the fork caps on an 80ish CB750? The forks are 35mm I believe but Depending on the wall thickeness, the cap nut could be anything from about 28mm to 31mm and threads could be 1.25 or 1.5mm pitch and I need to know the correct dimensions. What I...

Long time ago on a galaxy far far away I used to race a 350cc CB77. I actually built two or three of them over the years and sold the last complete race bike a few years back along with a trailer load of spares. But of course I kept a pile of good parts to build myself another one, one day...

I dusted off the wife's FZR400 and fired it up and as I blipped the throttle the headlights got brighter and then less bright as the revs rose. So I grabbed a multimeter and checked and the battery had a loose ground lead, so I tightened that and got a charging reading of 15v and sometimes...

I have three NOS apparently genuine Honda float valve assemblies part number 16011-287-004 for sale. Regular price on line seems to be around $20 each, so I will sell them for $10 each or $25 fro all three shipped.

I have a CL200 motor that is available for a one time only cost of 25 bucks, but it has to be picked up from North East Illinois in the next month. I was keeping it for a hybrid CB160/200 project, but I need the space more than I need another project, so it has to go. It's a CL so the starter...

This one is brand new and ready to fit on any smallish bike - RD350, CB160, CX500 perhaps. I bought it for a CB160 project but with the stock tank it's too short for me, so time to clear some shelf space. $50 plus shipping to CONUS

6 speed GS550 transmission. Not sure what year or model. It was another brainstorm of an idea that didn't go anywhere, so it's time for it to go back into a Suzuki GS550 where it belongs. Looks to be in excellent condition. $65 shipped anywhere in CONUS.

As it says. regular RD350 six speed gear set. All looks to be in great condition $50 shipped

Yamaha R1/R6 caliper. One side only. Looks to be in excellent condition. complete with pads and pins. $40. shipped

FZR1000 aluminum swingarm plus rocker arm. Not sure if I have the links, but I can look and see. No axles or wheel adjusters $75 plus shipping GS500 swingarm. Adjusters were cleaned and bright zinc plated. No axles. $60 plus shipping at cost

I really need to move some of the many parts I collected over the years, so let's start with some forks Goldwing fork legs. 37mm stanchions, 4 bolt caps, air caps missing schrader valves. $25 plus shipping at cost GSX600 Katana complete forks.41mm legs, clipons above top triple clamp...

For sale a set of rebuilt BS38 Mikuni carbs. Ultrasonically cleaned and soda blasted exteriors. All steel parts removed and re-zinc plated. New shaft seals. Fully rebuilt. Ready to bolt on and go. $250 shipped to anywhere in the continental US.

A buddy of mine is selling his CB900 Honda. When I spoke to him today he was asking $1,200 and about to put it on craigslist on Monday, Paint isn't stock (he can't help himself from changing colors) but the bike is sound last time I heard it run. If you're interested, I'll get the details.

Title says it all, but I am looking for a long breadbox style tank for a late model SOHC CB750F for a project. It will most likely need some modification to work on this particular bike, so I am not looking for great paint, but without rust or major dents would be an advantage.

Brand new still in the box and still in bubble wrap. I ordered the wrong size/color and now it's just taking up space. 1.85" x 19" x 36 holes ideal for the front wheel of many bikes Drilled for a disk brake front as far as I know. $90 shipped. (Shipping is expensive on rims because they are...

Anyone got a spare rear sprocket carrier for a 1WG 88 FZR400?

CL200 motor - same as a CB200 but with starter motor blocked off. Perfect for that cafe racer project or for parts. It's a complete motor that I bought a few years ago for parts and never got around to stripping it down. Does not have carbs or inlet manifolds. Turns over and feels like good...

This GT750 Suzuki is getting to be a PIA. After fixing all the leaks from new components, I have it running really nicely except below 2000 rpms. At idle it shakes much like an old British twin except that it's a side to side shake and the front shakes not the back. It has new pistons in...

Anyone got a cheap basket case RD that they need cleared out of their workshop/garage/basement? I don't need barrels or crankshaft or even crankcases, but I'll need all the gears and shifters and kickstarters etc. Don't need any electrics or even a rear wheel. I do need a frame and forks and...

I have converted bike top use LED blikers and as long as they have 2 idiot lights ( L and R) or no idiot lights, they are easy to wire with a suitable flasher can. In the shop now is a bike with single idiot light and it works fine with old style incandescent bulbs but with LEDs it flashed both...