Search results

Dyna coil are junk? That is news to me... Ive replace crappy no name coil by Dyna coil 3-1 because of one is crapping on me... I still have the old stock one... Envoyé de mon SM-G920W8 en utilisant Tapatalk

Here's my setup CB450 71 with Dyna coil, Dyna s ignition unit, 7amp ups gel battery, Brand new rectifier for Oregon, stock regulator. Problem: after riding for a while one cylinder seems to cut out (I could see tach cutting out which is linked to the right coil) So ive decided to swap the...

I have one from a cb450 71. But I'm from Canada. Envoyé de mon SM-G920W8 en utilisant Tapatalk

I'm with brodie! Some engine tuners even make the travel tube shorter... Not longer... Might even give some timing problem... Bad idea.

Well... I can say that it's a lot of fun to ride! And people likes the sound too. Thr use those piston kit in racing and guess what... They are pretty fast... Faster than any other stock 450.

I've made the same upgrade to my cb450. I had to open the engine anyway so I haven't run a stock 450. Hers what I have on mine Dyna coil and ignition New valve Piston kit with Cooper gasket Head And deck milled 520 chain conversion kit with aluminum sprocket Mikuni vm32 Would I do it again...

Up

Yeah that's what I meant. Cv carbs slide are not moved by the cable so usually they are not stuck. Since the op put them into pieces I tought he already test the carb for full working.

Heat vs cold fuel? Did you checked the plug?

Cb500t are CV carb so no slide. Of course you need to check the throttle cable and the fuel line for pinch.

If the boot would leak then the rpm would be up high

Usually it's cause by dirty jets. But! If they are not sync for sure it can cause problem. Bench sync then at least and try it again. Are you sure that fuel line is not kinked?

Up

WOW!!! It looks like bodyshop paint! No clear? How can you make the paint flow like that! GOD!

I have 2 carburators for sale for kawasaki s2. Carburators are cleaned in an ultrasonic cleaner. might need a gasket kit. 80$ each plus shipping. I can bead blast them for 10$ each. Let me know if you guys are interested. carbsonic@gmail.com

I have 2 carburators

Just wanna give you guys an update. All my price is canadian so juste one carburator (40 CAN) would come 33$USD right now. Compared to my competitor you don't have to put the carburator into parts as we'll do it. We also have a stock of the major bowl screws type so we can change them if they...

Ok of course everything is removed but I've done many of those and I haven't removed the the butterfly shaft. I'm not using any dangerous solvent that can harm the rubber seal. But if a rebuild kit is bought then for sure I remove all the component to rebuild those.

Hi teaser. The first option is of course all the carbs opened up and cleaned, reasamble and tested for leaks bench sync and sent back to customer. The second option is carbs opened up and cleaned and a rebuild kit applied to those (gaskets o-ring etc.). Bench sync and sent back to customer...