Search results

I've wanted to build a CB350 trike for awhile and recently bought a lot of parts which cost more money than I thought they would. I started with a stock CL350 frame. I cut the neck off and angled it 10 more degrees than it was stock and welded it back on. I cut the top of the frame out and put...

I pulled the custom CB350s out of the garage the other day for a test ride and photo op. All 5 are running. I built these between 2010 and early 2017.

I made an engine test stand. I think it's pretty neat and I plan to use it a lot. It's almost plug and play. Pictures below and video. https://www.youtube.com/watch?v=_MmSirFNtBk

I really like the whole Harley bagger look right now. I've had an idea to do a CB350 bagger style for a few months and finally started it. I tubed some of the frame and made the rear a hard tail. Added some bags and I'm not sure which position the bat wing in the front will be at or if I'm...

Need a 21" wheel from a 1972 SL350. They only came in 21" in 1972. I'll need the brake and axle too.

I recently got a CB350 and it's in really nice condition except the gas tank is rotten thru, big time. I need a new tank. I'm trying to keep the bike as stock looking as possible. I'll pay a fair amount for a decent one but I don't consider the $600 ones on ebay to be a fair amount. I don't...

This bike has been floating around in my garage for awhile and I have recently finished it for the most part. It's a CB350 with a CL350 gas tank and some random metal pieces welded together to make a seat extension. There is a bunch of reinforcing steel under the seat area and around the...

I'm looking for a discontinued Ballistic battery. I used one as a mock up for a custom bike thinking I could buy a battery when needed but they discontinued this size. There isn't enough room to fit the next larger size Ballistic battery. It should have about 80amps and is tiny. They do...

I started my latest CB350 project this weekend. I wanted a dirt bike style bike. Something more than a CL. It's a 71 CB with SL350 triple tree, forks, and 21" front wheel. The forks are 4" longer than CB forks and they are 35mm instead of 33mm. The rear wheel axle mount was moved down 2.25" and...

I need the bowl from a petcock used on the 1974 KZ400. I lost it somehow while cleaning the petcock. Anyone have a spare bowl for this? I realize it's a somewhat rare bike. The threaded area of the bowl should be 1.25" across.

I'm looking for a 1972 SL175 gas tank. It should be blue with a white stripe. Looks like this.

This turned out to be a great little bike. It's super easy to ride and runs great. I made the handle bars from a set of stock bars. You can slip through tight spaces with these bars. Stock CL350 gas tank with original paint which is hard to find these days and I prefer to leave the paint...

This is a CB360 that I worked on for a friend. She took it to a shop and they charged her a lot of money for a little bit of work. I cleaned the carbs, a couple times, they were really bad, then did a rebuild on them with all new little parts like jets. Swapped the gas tank, grips and tires. It...

This bike started as a complete Cb350. I wanted to put a mono shock on the rear of it that I had off of a SV650. The angle wouldn't work right and there just wasn't enough room around the front of the swing arm so I removed the shock and made it a hard tail. I wanted the cafe look for this...

I picked up a pile of shit CB350 from a motorcycle yard sale guy for next to nothing. I really just needed the engine. I'm running out of styles for CB350s so it took me a little while to figure out the direction I wanted to go. I cut it up, lowered it, hard tailed it. I plan to recess...

I couldn't find a better place to put this but I figured most of you would like the story/pics. Some of you may have heard about this place. I tracked down the owner and went up there. It was a great experience. Story and pics here http://dcclassiccycles.dynamitedave.com/graveyard.html

I actually need 2 of them. They are 21" front wheels that look just like CB350 wheels. Pic of one

I finished my Honda CB350, well mostly finished it, couple small things to do still. This is 1 of 2 CB350s I have, the other one is on the bike lift right now being stripped and fitted with cafe parts. I'll finish it sometime this decade. I'm not a fan of the stretched out bobbers, i think they...

I'm David from Woodbridge VA. I have been messing with motorcycles for a few years. My first few builds were bobbers but now I have started my cafe. I ride a sport bike everyday. I did an around the country trip on it last year. You can see 1,882 pictures from that trip here...