Search results

Maritime, I saw an add online a few years back for a pair of YSS rear shocks(I'm certain that I want a pr. of YSS brand shocks) that had that repro look as if they were modeled after the stock 84' CB125S shocks:all chrome w/ chrome springs and a narrow O.D. spring and lower damper body to fit...

I know this is an old thread,but I have tried a pr. of Hagons and the progressive springs are too stiff for the stock front-end(I need straight-rate springs for equal compression and rise,front and rear) which I'm using And,Dave Quiin is now out of business.. I have changed my swing-arm to a bit...

Re: Piglet 2.0, 72-CL100-Going OFFFF THE GRID! Nice seat cushion 8)

Re: 72- CL100 - Going OFFFF THE GRID - Piglet 2.0 Looks good 8)

Show us some pics Roots.

Alright,now you 're back at it.

I hope you get as much reserve sleep as you can to overcome feeling weak;the new shocks look good 8) What brand are they ?

I've fixed the stock carb. a number of times;I have a couple extra 'parts carbs.',helps to have spare oem parts.

The CB/CL100/125 speedo's are meant to be sealed which is a pain.. ::) I opened-up mine anyway by cutting across the top of the black case up real close to the sight window,I then unscrewed the 2) phillips screws at the bottom and removed the speedo unit from the top and serviced it.I know it...

I have a 2.5 gal. tank and bought 1 gal. of Evaporust.I have done small parts w/ it also and notice that it works about 7 times faster if you heat it up on a stove top burner while covering the pot so it won't evaporate.That's more difficult to do w/ a steel fuel tank so I heat up the 1 gal. of...

That's for sure :)

Nice dry weather for you there.I live in the Pittsburgh,PA. area and the ground never dries up,always moist w/ too many allergies that I have I'll be moving out to the West USA soon. I'm glad to hear you jetted-up to keep your engine running cooler. 8)

I hear they're more accurate than some real cheap ones too ;)

I'd like to purchase one just like that and I'm in the US,will use it for my CB125S which has oem CDi;was it expensive ?

I especially like that Koso tach.,how do you like it ?

nice :)

That's some crispy cold sh*t,I'd have to get off and run w/ it and shake each arm a bunch of times if I was heading out somewhere and during the ride too.

You should be able to get a real good deal on a clean,used oem harness on Ebay late Dec. & in the beginning of Jan.,slow time for sellers.. keep checking it out. lots of sellers are starting to drop their prices already but I'm waiting and hope to find a cylinder head in good cond. for an XR200...

Was it below 25? The other thing is you can walk it for a little if you get too cold and then jump back on,it'll get you there though ;)

Max, I think Matt at SparckMoto will know..