Search results

I picked up this what I think is an 83 Honda shadow 750 on a trade. It has a bit of work go to get her going. This bike is for the wife. She wants to tear it down and rebuild it. From first look it needs a full seat and some top end work done. We will know after we give it a good cleaning...

My 09 xr1200 tracker with stage 1 intake and exhaust. I will be making some changes soon. Sent from my SM-G935W8 using DO THE TON mobile app

Getting the seat pan templates made and the stash spot for the electrical components Sent from my SM-G900W8 using DO THE TON mobile app

Front end is looking good Sent from my SM-G900W8 using DO THE TON mobile app

Got the tabs welded on for the rear plastic and taillight Sent from my SM-G900W8 using DO THE TON mobile app

Oh ya the bike is going to sit 3/4" lower than it is now Sent from my SM-G900W8 using DO THE TON mobile app

Got the rear hoop.and supports in all sleeved 2 and a half inches rear plastic is just resting there. Have the shock mounts to weld on then remove tabs and get her painted. got brand new rings and made my own gaskets. So engine is going to be cleaned and put back together Sent from my SM-G900W8...

Oops how did that yamaha get in there? My other build a 2 stroke Sent from my SM-G900W8 using DO THE TON mobile app

Got the front end together again to get a look. Haven't repacked the bearings yet. Will do that after the frame has been finished. Tanks still needs some work but it think it's looking pretty good. Sent from my SM-G900W8 using DO THE TON mobile app

Cleaning up and painting some of the parts. Sent from my SM-G900W8 using DO THE TON mobile app

Frame has been stripped of paint and primed. Still have to do some work to back of frame before painting a nice bronze color Sent from my SM-G900W8 using DO THE TON mobile app

Got the tanks dents fixed and the area where the tags were, filled in. Sent from my SM-G900W8 using DO THE TON mobile app

Getting the first part ready to blast Sent from my SM-G900W8 using DO THE TON mobile app

I built a soda blasting cabinet so I can clean all the parts i have Sent from my SM-G900W8 using DO THE TON mobile app

No I didn't weld the pivot yet but thanks for the advice. Sent from my SM-G900W8 using DO THE TON mobile app

So I cleaned up the pistons and the cylinder. Tonight I am honing the cylinders Sent from my SM-G900W8 using DO THE TON mobile app

In about 2 weeks I am going to make a media blaster so I can blast the frame clean also the tank down to bare metal Sent from my SM-G900W8 using DO THE TON mobile app

I'm not going t9 take the ginder to them either when I detab the frame they kids match the factory welds. I actually found a piece of mig wire on the swingarm forgotten by kawasaki Sent from my SM-G900W8 using DO THE TON mobile app

Forgot the pics lol Sent from my SM-G900W8 using DO THE TON mobile app

Before you jump on me about my welds. I am not a welder. I know they hold. Sent from my SM-G900W8 using DO THE TON mobile app