Search results

Well I have treated the Ace to a oil cooler, As I live in the UK I decided to go for the one from oo racing. Great delivery (next day). Once fitted I'm very pleased with it, But if your going to have one of these you have to bear in mind that the fitting kit supplied is for a CG type frame with...

Well I've been in the garage again. This time it was to make a under tray so I could do away with the shaped plastic mud guard in front of rear wheel. The tray is made out of thin ali sheeting, I do have to remove it to paint airbox side. While it's off I'll do some measuring and post it with a...

Whilst I was fitting new rear shoes to the Ace I thought I'd go for the vented brake drum like Dave M has done on his. I think it's worked out OK.

Hi again, After much searching and trawling the bike breakers for a fairing I had given up all hope of finding one, until..... Talking to a friend of mine about it who lives 70 miles away comes out and says " I have got just the thing " A couple of weeks later we meet up and he presents me with...

Thought I'd just share this latest mod I've done to my Ace. On the odd time I've come back to my bike and noticed that I'd left petrol turned on and thought that's lucky it hasn't flooded and poured all the fuel on the garage floor. (quite common in the 70s). So I found a scooter vacuum fuel...

Hi, Have decided to move my battery as it needed renewing, also that I can fit an after market air filter at some point. Here's what I did in case you want to move yours. After removing L/h panel and battery I removed the battery carrier by taking out the four self tappers that hold it to the...

Hi, Is there anyone going on the Deans garden run at Stockton on the forest near York on Wednesday evening 25th June? Tea's Coffee's and hot food. Across the road is the bike museum called Cravens Classic Collection. Well worth a look as he's only open first Sunday of the month during summer and...

Hello again, Thought I'd upload a couple of photos of my Ace since removing my rear mudguard. After removing it I was unsure what to use as a under seat tray, had a look in my garage and "hey presto" found that a paint roller tray is of a good size and right plastic for cutting and shaping. I...

Clip on's finally arrived from China, Took some fitting as spacers were wrong size and spent some time using bench grinder. Relocated ignition switch under tank (just needs bracket tidying up). After market H/L brackets along with pattern CG H/L unit. Main beam warning light fitted in H/L shell...

Hello, included are pictures of my Ace 125. First is one of screen, when I bought this Ace pre-loved it came with this screen on and I'm trying to find out if anyone knows where Mike can obtain one. Other photo is of footrests which are Yamaha R6 pillion that fasten straight on and are lot...

A few photos of my Skyteam Ace. Changed a couple of things and filled in casing writing.