Search results

Re: CB550 Bobber In the background of the first pic you can see the cl450 dirt bike I built and quickly destroyed the transmission on. If you happen to know anyone with a crusty cb450 or cl450 engine laying around let me know, because I have to rebuild the transmission on that one and usually...

Re: CB550 Bobber Off subject but if anyone is interested I just finished up this 450. Swingarm is extended by about 2.5 inches and I did the twisted frame from solid hex stock.

Re: CB550 Bobber Sorry to keep posting but I put a shit ton of work into that build and it was my first ground up build. Here is the only pic I had with the tank mounted up top. Once I spent as much time as I did molding and sanding the frame. The back bone of the bike looked so good I couldn't...

Re: CB550 Bobber I originally had the battery covered with a leather bag. Looked good and was super easy to do. This picture was taken at a night club in Charlotte called The Chop Shop. I had a couple of bikes on display there while I was working on other things.

Re: CB550 Bobber Here is a pic of the upper tank.

Re: CB550 Bobber I'm the one that originally built that bike. So if you have any questions about any of it hit me up. I originally built it with 2 gas tanks one mounted up top traditionally (which I still have on a shelf in the shop painted to match with the same number 5 on the side) and the...

Oil leak is most likely coming from the seal right behind the shifter arm. Its a round oil seal thats usually pressed in. To replace the seal you will need to remove the cover pull the old one out and press another in. I will usually use a press to do this but it can be done by hammering it...

Yes I'm interested in the exhaust, and No the frame doesn't have to have a title.

I basically need a frame and an exhaust but could always use a parts bike that has a decent frame. Let me know what you have. I'm willing to buy or trade. I have a lot of various honda parts, including a few spare cb750 sohc engines laying around. Preferably you will be within a 4 or 5 hr...