Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
i hope this isnt a problem and please let me know if it is.
i bought a cl350 k0 the other day and started a for sale thread on another friendly site. i have posted alot of pics so i hope its okay to just link over to it.
i am willing to deal on anything you see. will take any pics needed...
for those of you with custom length cables on a 350...
what length did you use?
i have a set of drag bars on my 350 and i am about to order a set of custom length cables. i have the old stock cables and from the way i measure it looks like i need about 3" shorter on the throttle cable and...
in desperate need of a good working stator out of a 1978 honda hawk or a good sugestion on a company to rewind an open exciter coil.
please pm me with anything you have
thanks
morgan
Re: 71 CB350 Project
man you are too good. i have got really good condition emblems so thats no problem. ya if you want to let the whole switch assembly, all four signals, and those side covers go i'll take them.
pm me to let me know what you are looking to get out of them
Re: 71 CB350 Project
man i call dibs on the signals and side covers if you are getting rid of them. and if you want to get rid of your control switches (left side specificly) let me know. have a 71 cb350 that the PO removed the turn signal stuff and my side covers have missing vent pieces...
yep.. live off 24th and kasold.
hope to be done with my 71 cb350 around march. have it stripped to the frame and i'm doing a top end rebuild with first over pistons and rings. pistons and gaskets in the mail then off to be bored. still debating what to powdercoat (if anything)
ya i had the filters and housings off, choke open and throttle wide open checked each side three different times with the same results. cant believe it was running so well with the rings being trashed. took off headers and had oil on the outlets and on spark plugs.
not going for hopping it up...
a little background:
bought a running cb350 for $600 with a title. had a bad battery. replaced the bad battery and it fired right up and seemed to run fairly well. revved it up to about 6k sounded good. started to see oil coming out of the exhaust. shut it down and pulled the plug and saw a...
ya it seems like you guys come up with the killer deals! thats would be a perfect bike. another member had a decent one in ohio for $500
i'm in lawrence kansas (too far from PA). i think i am going to wave $600 in this guys face and see if hell help me load it in the truck ;D
i appreciate...
thanks for the replies guys. it's a 5 or 6 out of 10. went by and looked at it again last night after work. it's been sitting for a while.
luck hit me last night and i found a private seller on CL with a running bike, all original, new tires and exhaust, in good shape and hes asking $1000 for...
a shop in town has a complete, running cb350 for sale with title. they are asking $1200 :o . my intuition says this is too high but with winter upon us pickins are slim. bike is in fairly good shape and tank looks literally brand new inside. has new tires as well. what say you? would you buy...
i see alot of guys without rear fenders and i know some are race bikes and dont need plates and signals but for those of you who are riding street bikes what have you done with your plate, tailight, and signal? is there a simple bracket you can buy or are you guys fabbing stuff up? i really like...
that is exactly what i am looking for!!! don't know about cleveland though :( . that would be one hell of a drive. hell it would probably cost me 500 just to drive there and back. i really appreciate the offer though. wouldn't be headed the kansas city way anytime soon would you?
edit:
see...
live in lawrence kansas and i'm looking for a project (arent we all). looking for a running or non running (not siezed) cb360 or 350. prefer a 360. will travel a ways if the deal is good. cash in hand. hoping someone has one laying around but seems as if there is noone out my way.
anyone help...
hey guys, new member here from Lawrence Kansas. been looking at doing some sort of a cafe racer project for hobby/fun. looking into the 1970's hondas (looking like a cb360). started reading some threads and figured i'd better register. will be doing a ton of searching to hopefully answer alot of...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.