wfo speedracer
Been Around the Block
So looking at this front wheel, I can't find anything Suzuki that matches up to it, I have been searching and looking at different front hubs and I believe this is a Honda 350-360 brake backing plate, two things I noticed , most of the Suzuki backing plates have a slot to locate the plate, this uses a brake stay arm and looking at the speedometer cable it looks like a Honda setup to me, slotted piece sticking out to drive the cable, round hole with a single retaining screw, most of the Suzukis have a cable that fits into a slot and the drives have male treads that the cable screws on to.
Motion pro will make any kind of cable you want but then we are talking about an $80-90 dollar speedo cable, my thinking is I am going to get a new CL 350 cable and a new bellmouth cable ferrule and try to make my own cable with parts off of the old Suzuki one, I also have to get a new speedo, I did get this one freed up but the clock spring is broken and it does not return to zero.
Motion pro will make any kind of cable you want but then we are talking about an $80-90 dollar speedo cable, my thinking is I am going to get a new CL 350 cable and a new bellmouth cable ferrule and try to make my own cable with parts off of the old Suzuki one, I also have to get a new speedo, I did get this one freed up but the clock spring is broken and it does not return to zero.