1974 Yamaha RD200

Engine paint is finished. After going back and forth on the idea, I think I'm going to run the oil pump and alternator covers as is.
 

Attachments

  • PXL_20210308_201155944.jpg
    PXL_20210308_201155944.jpg
    266 KB · Views: 196
The fab work is basically done. The seat is hinged on the back and opens up to reveal the battery, electronics tray, and access to the oil tank. Plenty of room under the gas tank for wiring and ignition coils. Flush mount (with spring loaded pop up) gas cap finishes the tank.
 

Attachments

  • PXL_20210506_233511517.jpg
    PXL_20210506_233511517.jpg
    270.6 KB · Views: 169
  • PXL_20210506_233524381.jpg
    PXL_20210506_233524381.jpg
    224.8 KB · Views: 164
  • PXL_20210506_233529397.jpg
    PXL_20210506_233529397.jpg
    141.3 KB · Views: 171
  • PXL_20210506_233534129.jpg
    PXL_20210506_233534129.jpg
    173.9 KB · Views: 174
When you finish mating the case halves and notice a transmission gear still on the bench...
 

Attachments

  • Untitled.png
    Untitled.png
    1.3 MB · Views: 162
Back
Top Bottom