FWTW, I used JB to fill the indents for the HONDA badges on the sides of the CB500T tank I used in the Hedgehog. I had heard (and seen) that Bondo doesn't work well for that kind of filling and then heard about using JB. I thought it worked very well; sanded nicely, and after filling and primer, painted well, too.Shaping up well. JB Weld huh - decent filler material? I used it to fill some pinholes on some tubing, does it work well on larger holes like this? No shrinkage? No problem with primer/paint?
Thanks. Tanks last wetsand and paint. Hoping temps hit high enough to clear. Did a big dent repair on Pilot I'm going to use the 2k on after bike bits are done. They say 18-25C on spraymax can we're supposed to get to 16 C but hoping out of the wind and in the south sun where I setup to do it it will be good.Proper.
Ain't that the truth?!?!?! I had a couple of spots on the Hedgehog that drove me batty(er). They looked perfect in primer and looked perfect w/ the silver color, but once the clear went on there were terribly noticeable places, couldn't miss 'em. Very frustrating.Bummer. It's a dark art is filler