1979 CB750 DOHC Compatible Front End

[Koestum]

Need a front end for my new project. Anyone got a leftover factory front laying around from their GSXR conversion?

I'm in San Jose, CA and willing to drive a bit, or shipping would be cool too.

I don't need the wheel, I have a good wheel.

Thanks

 

[teazer]

That wheel is missing the disks so it's quite possible they were bent and the wheel might also not be as round as it should be. You may want to lift the front up and spin the wheel and check it for damage.

PJ is right that teh forks have probably been rotated in the triple clamps to make it movable and I would speculate that the wheel was also damaged and this one might be a spare.

 

[Koestum]

That wheel is missing the disks so it's quite possible they were bent and the wheel might also not be as round as it should be. You may want to lift the front up and spin the wheel and check it for damage.

PJ is right that teh forks have probably been rotated in the triple clamps to make it movable and I would speculate that the wheel was also damaged and this one might be a spare.

Thanks, ya the wheel has a big dent on the other side.

I ordered correct forks & triple off ebay. Pricey at $175 but had to be done & few options listed to keep it original. It will at least look a lot better soon.

Keeping an eye out for better pricing on the other bits I need.