AbbyRider said:I"m digging that rear fender. Nice work.
notlob said:Have you connected the 4 wires to the solenoid correctly? if not you have somehow caused a short somewhere.
madd750 said:Thanks for the help notlob, the solenoid on mine is different but you pic will still help. I still haven't attempted to figure out the wiring problem but i do know that the starter is still good. If i jump the starter wire directly to the battery the bike fires up like it's nobody's business. Which lead to my next problem. My carb is leaking from the overflow spouts on the bottom, what does this mean that i have a stuck float? i have never worked on bike carbs before, any help would be appreciated.
notlob said:More than likely the float valve not seating properly. Either crud in there or just worn.
Remove the float pivot pin and clean the float valve and seat also check your float level while you are in there. Spay carb cleaner is your friend.madd750 said:I'm going to take the bowls off and give them a good cleaning and see if that helps, i also have a spare carb so i may be able to steal parts from it and make one set of carbs usable..............i hope
Hoosier Daddy said:Remove the float pivot pin and clean the float valve and seat also check your float level while you are in there. Spay carb cleaner is your friend.
Nooooo.... buy a new gasket.If those gaskets are no good i will use some gasket maker
Hoosier Daddy said:Nooooo.... buy a new gasket.
Seriously
UrCoolestFriend said:Love that short seat with the rear fender.