1980 SR250 Simplified Wiring Diagram

[sbruton]

Hi all,

I'm planning to remove the dash/ dash lights and safety circuits from my SR250. I found a stock wiring diagram online and have edited it to what I believe should work. I would appreciate it if someone could have a look and let me know if it appears to make sense. The removal of the dash lights is pretty straight forward, but I'm not 100% on the removal of the safety circuit.

This is the stock wiring harness:



Essentially I want to remove the safety relay and the associated wiring. I *think* that if I remove the sky blue wire from the neutral sensor and and remove the clutch switch (black/yellow) and then connect the red/white wires I should be good to go?

Here is my proposed diagram:



Am I missing anything?

Thanks in advance.

 

[Sonreir]

Looks pretty good to me.

 

[sbruton]

Thanks for the input Sonreir!

I don't think this will change anything, but I've attached the narrative out of the Service Manual for the starter/ safety circuits for additional information: