doctorcat
New Member
Coopacoopacoopa said:I feel like you might already know this, but if there isn't a conversion bearing option you might be able to go the route of pressing the gpz steering stem in zx10r lower triple tree. My kz750r1 is using a zx9r upper and lower yokes with a kz steering stem. If the zx10r steering stem is smaller than the gpz stem, you're in business. Vice versa with those dimensions would make things a little trickier.
I might just call up allballs and give them the dimensions. The other option is just keeping them for another project that may be coming down in the works. The forks are now entirely rebuilt, and I'm about to embark on sealing the air assist off as I fitted progressive springs and no longer need them. I'm just going to thread the hole and epoxy a screw into place.
so here's an update...
the car fired
I had the plugs out and it sparked!
so the starter works, the wiring works, and I just need to clean everything up now. This is SO EXCITING MY BIKE WILL BE READY FOR SPRING!
https://youtu.be/G6YsOSk1Z28