400four, Dueling Banjos

I will start using Honda seals full time, as these have springs on both sides.
I think the aftermarkets in the black knight only had a single spring on the inside.
 
Hmm, the ones I used on the GL1100 forks I put on the 1000 were aftermarket, I think, but had the double springs and an up-rated scraper deal. They were sold as better than OEM?
 
Polished and Sharkhide applied.
Stuff is nasty enough to eat through the cup in a few seconds .
Its cold here and it still dried hard in just a few minutes. I brushed it on then wiped w a rag to stop drips and runs. It’s barely thicker than water. But it looks really good. Might have “muted” the mirror just a smidge. I’m really happy.
It’s super clear and hard to see missed spots when applying. I’m glad I used a brush.


FD89C0F8-42F1-41F4-AD0F-CAC3D9640289.jpeg
69E09978-4F9C-42BA-AFC5-F3AC3EED35C6.jpeg
5E0637E2-B17C-4494-B5DA-74A79B48C62A.jpeg
42B6F3E8-404F-4E2C-B9E5-5B25E9C04DEC.jpeg
 
Excellent. That stuff works great. And if you ever need to reapply for whatever reason you just wipe more on and it fuses with the old layer. Little goes a long way too, right?


Sent from my iPhone using DO THE TON
 
I wiped it on with a rag. Now I think a brush is a better idea. It was nasty. Oh and they look great
 
The new fork pipes arrived just in time from XXXXX. They are nice and measure to Honda specs.

BTW, Not about the fork pipes but I just had an incident concerning another part from 2fastmoto.

As I promised him, Any good word or mouth advertising I have given him will stop today and the opposite will begin.

Thus, 2fastmoto an eBay seller is a complete POS. Do not do any business w 2fastmoto. Thanks.

8BAD6FA1-6A81-4269-9A05-A2F29E5DCF00.jpeg

9DC304B9-368B-453A-8410-DFFA9B20DD2D.jpeg
 
Last edited:
Heck 7’8” long. I would need a mule team.
I made mine 9ft long 14 inches high. I can barely push a complete Honda up on it by myself.
 
He's not wrong, that bike table really is a thing of beauty. The bike that's sitting on it is looking neat as a pin too
 
Thanks guys.
Got a bit more done last night. I worked my ass off trying to get the brake panel to shine up. Looks like shit.
I think my polishing wheels are shot. Rachel and I are gonna make a supply run this morning. Harbor freight is top of the list.


181006F7-9592-4F4F-933A-7C50B5D1F3C3.jpeg
316E7621-BB8B-4412-9441-FE003977BE5C.jpeg
38D2FE25-7877-4FA8-99A4-163FCB50B34D.jpeg
D2851ED2-35F2-4800-AD5B-E012CCF72E73.jpeg
2DE043B9-8493-4C83-82EC-3E4777E81B8F.jpeg
CF9E4581-E694-4C7B-A940-339ECA2CDF5B.jpeg
BEC61E08-7E16-4177-878F-96DA6E17F7C6.jpeg
319BE809-BCD5-41C2-8BAD-5051DF435913.jpeg
9D4881E2-C508-4DE0-8703-5A564491D659.jpeg
 
Last edited:
Back
Top Bottom